Tuesday, April 28, 2009

Rock Me

This tutorial was written by Ivory on 04/28/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismale Rac which you can purchase HERE

Font of your choice
Scrapkit I used is Rock It, Roll It Kit By Honored Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folde

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the drum kits and resize 40%

6.Paste as new layer and add drop shadow

7.Move to the right and down a little

8.Open one of the glitter ball and resize 20%

9.Paste as new layer and add drop shadow

10.Move to the top right

11.Highlight mask layer

12.Open one of the glitter doodles

13.Paste as new layer and add drop shadow

14.Move to the bottom

15.Duplicate/ mirror / flip

16.Highlight top layer

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Move to the left

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Move to the left

23.Open one of the ribbons and resize 55%

24.Paste as new layer and add drop shadow

24.Move to the bottom

25.Open one of the brads and resize 5%

26.Paste as new layer and add drop shadow

27.Duplicate several times and place randomly around your tag

28.Add copyright and watermark

29.Add your name

30.You can merge visible



Hope you enjoyed my tutorial

Just Pink

This tutorial was written by Ivory on 04/28/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Jose Cano which you can purchase HERE

Font of your choice
Scrapkit I used is Burst Ur Bubble Kit By Crazy Lady Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow and move down

6.Open one of the diamond blings and resize 55%

7.Paste as new layer and add drop shadow

8.Move to the top of the mask

9.Open one of the flowers and resize 50%

10.Paste as new layer and add drop shadow

11.Move this layer down to below the mask layer

12.Duplicate this layer til theres enough flowers to go along the top of the mask

13.Highlight top layer

14.Open another flower and resize 20%

15.Paste as new layer and add drop shadow

16.Place at bottom right corner

17.Duplicate and place in the same corner

18.Duplicate 2 times more and place these two on the opposite corner

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Move to the left

22.Open one of the ribbons and resize 55%

23.Paste as new layer and add drop shadow

24.Free rotate 60 to the right

25.Move to the bottom

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

Saturday, April 25, 2009

Love Always

This tutorial was written by Ivory on 04/24/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube/s of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Love Always Kit By Sticky Kisses Scraps and can be purchased HERE



1.Open a new image 500x500 white

2.Open The heart 1 and resize 70%

3.Paste as a new layer on your white

4.Add drop shadow and move up

5.Open the triple frame and resize 55%

6.Paste as new layer and add drop shadow

7.Move down

8.Click inside the middle frame and expand by 3

9.Open your close up tube and resize if necessary

10.Paste as new layer

11.Invert/delete/select none

12.Add drop shadow to tube layer

13.Move tube layer below frame layer

14.Repeat 8-13 with each of the side frames

15.Once they are all below the frame layer

16.Highlight frame layer and add drop shadow

17.Merge frame layer down with tube layers

18.Open one of the beads and resize 10%

19.Paste as new layer and add drop shadow

20.Duplicate several times and place round your tag

21.Open one of the crystal flowers and resize 30%

22.Paste as new layer and add drop shadow

23.Duplicate a few times and place randomly round your tag

24.Open a different flower and resize 10%

25.Paste as new layer and add drop shadow

26.Duplicate several times and place around your tag

27.Add copyright and watermark

28.Add your name

29.You can merge visible



Hope you enjoyed my tutorial

Music

This tutorial was written by Ivory on 04/24/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is Toadies Kit By Made By Justine and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the line of music

7.Paste as new layer and add drop shadow

8.Move to the top

9.Open one of the beadstrings and resize 80%

10.Paste as new layer and add drop shadow

11.Move down a little

12.Open one of the music words and resize 50%

13.Paste as new layer and add drop shadow

14.Move to the top right under the notes

15.Open one of the sunglasses and resize 20%

16.Paste as new layer and add drop shadow

17.Move to under the word music

18.Open one of the buttons and resize 20%

19.Paste as new layer and add drop shadow

20.Duplicate several times and place randomly round your tag

21.Open one of the butterflys and resize 20%

22.Paste as new layer and add drop shadow

23.Move to the bottom right circle

24.Add copyright and watermark

25.Add your name

26.You can merge visible



Hope you enjoyed my tutorial

Forever Friends

This tutorial was written by Ivory on 04/24/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
You will need a tube of your choice.
I am using the art of Keith Garvey which you can purchase HERE

Font of your choice
Scrapkit I used is Friends Forever Kit By Dezigns By Ali and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the frames and resize 60%

6.Paste as new layer

7.Select magic wand and click inside the frame

8.Expand by 4

9.Open your close up tube

10.Paste as new layer

11.Invert/delete/select none

12.Add drop shadow to tube layer

13.Move tube layer below frame layer

14.Highlight frame layer and add drop shadow

15.Merge frame layer down with tube layer

16.Open one of the flowers and resize 30%

17.Highlight the mask layer

18.Paste flower as new layer and add drop shadow

19.Move to the corner of the frame

20.Duplicate several times and place 2 to a cluster in each corner

21.Highlight top layer

22.Open one of the heart buttons and resize 10%

23.Paste as new layer and add drop shadow

24.Move to the top left corner of the frame

25.Duplicate and mirror

26.Open one of the bows and resize 10%

27.Paste as new layer and add drop shadow

28.Duplicate enough so you have 3 down each side of the frame

29.Open one of the Buttons and resize 20%

30.Paste as new layer and add drop shadow

31.Duplicate and place one on each end of the base of the frame

32.Add copyright and watermark

33.Add your name

34.You can merge visible



Hope you enjoyed my tutorial

Thursday, April 23, 2009

American Babe

This tutorial was written by Ivory on 04/23/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is United in Color Kit By Ivorys Designz and can
be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open your tube and resize if necessary

6.Paste as new layer and add drop shadow

7.Highlight mask layer

8.Open all 3 stars and resize 50%

9.Paste them each as a new layer and add a drop shadow to each

10.Arrange in a cluster at the top right

11.click on top star layer

12.Merge down and merge down again

13.Duplicate and mirror

14.Open both of the balloons and resize 50%

15.Paste as new layers and add drop shadows

16.Place one on each side of the tube and the top

17.Open a bottlecap and resize 40%

18.Paste as new layer and add drop shadow

19.Duplicate and place one either side of the tube in the middle

20.Open one of the bows and resize 15%

21.Paste as new layer and add drop shadow

22.Duplicate and place one on each of the bottom of the bottlecaps

23.Add copyright and watermark

24.Add your name

25.You can merge visible



Hope you enjoyed my tutorial

Aussie Babe

This tutorial was written by Ivory on 04/23/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is United in Color Kit By Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the circle frames and resize 80%

6.Paste as new layer and add drop shadow

7.Open one of the flowers on stalks and resize 40%

8.Paste as new layer and add drop shadow

9.Move to the lower right side

10.Duplicate and place on the upper left

11.Open one of the stars and resize 30%

12.Paste as new layer and add drop shadow

13.Move to the base of one of the flowers

14.Open one of the other stars and resize 30%

15.Paste as new layer and add drop shadow

16.Move to the base of the other flower

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Open the bead string and resize 50%

20.Move to the base of the tube

21.Open one of the bottle caps and resize 40%

22.Paste as new layer and add drop shadow

23.Move to the end of the beadstring

24.Duplicate and move to the other end

25.Open one of the bows and resize 10%

26.Paste as new layer and add drop shadow

27.Duplicate and place both in a spare place on the frame

28.open one of the sequins and resize 20%

29.Paste as new layer and add drop shadow

30.Duplicate several times and place around your tag

31.Add copyright and watermark

32.Add your name

33.You can merge visible



Hope you enjoyed my tutorial









Brit Babe

This tutorial was written by Ivory on 04/23/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is United in Color Kit By Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)


1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop Shadow

6.Open one of the frames and resize 60%

7.Paste as new layer and add drop shadow

8.Free rotate 10 to the left

9.Duplicate and mirror

10.Copy and paste the frame again and add drop shadow

11.Open one of the flowers and resize 10%

12.Paste as new layer and add drop shadow

13.Duplicate a few times and place randomly down the left side of the tag

14.Duplicate each flower and mirror each one

15.Open one of the bottlecaps and resize 40%

16.Paste as new layer and add drop shadow

17.Place on the bottom right

18.Open one of the stars and resize 20%

19.Paste as new layer and add drop shadow

20.Duplicate several times and place randomly around the tag

21.Open your tube and resize if necessary

22.Paste as new layer and add drop shadow

23.Highlight the top frame layer

24.Open one of the ribbons and resize 40%

25.Paste as new layer and add drop shadow

26.Move to the bottom of the tube

27.Add copyright and watermark

28.Add your name

29.You can merge visible



Hope you enjoyed my tutorial









Alice

This tutorial was written by Ivory on 04/23/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a close up tube of your choice.
I am using the art of Keith Garvey which you can purchase HERE

Font of your choice
Scrapkit I used is Alice Cullen Kit By Simply Iresistible Designz and can be
purchased HERE


1.Open a new image 500x500 white

2.Open one of the bracket pads and resize 55%

3.Paste as a new layer on your white

4.Add drop shadow

5.Free rotate to the left 8

6.Open one of the frames and resize 50%

7.Paste as new layer

8.Select your magic wand and click inside the frame expand by 6

9.Open your close up and resize if necessary

10.Paste as new layer

11.Selections/invert/delete/select none

12.Add drop shadow

13.Move tube layer down below frame layer

14.Highlight frame layer and add drop shadow

15.Merge frame layer down with tube

16.Highlight pad layer

17.Open the glitter doodle and resize 60%

18.Paste as new layer and add drop shadow

19.Move to bottom left

20.Duplicate/mirror/flip

21.Open one of the bows and resize 20%

22.Paste as new layer and add drop shadow

23.Move to top right corner

24.Duplicate and place on bottom left corner

25.Open the heart ribbons and resize 50%

26.Paste as new layer and add drop shadow

27.Move to bottom right corner

28.Open one of the flowers and resize 10%

29.Paste as new layer and add drop shadow

30.Duplicate several times and place randomly round your tag

31.Open one the flower sprays and resize 30%

32.Paste as new layer and add drop shadow

33.Move to the right over the ribbon

34.Open the brad and resize 30%

35.Paste as new layer and add drop shadow

36.Move to the base of the flowers

37.Add copyright and watermark

38.Add your name

39.You can merge visible



Hope you enjoyed my tutorial

Girls Rock

This tutorial was written by Ivory on 04/23/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Bandana Style Kit By Scraps With Attitude and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 90%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the doodles and resize 60%

6.Paste as new layer and add drop shadow

7.Move to the left

8.Duplicate and mirror

9.Open one of the flowers and resize 10%

10.Paste as new layer and add drop shadow

11.Move to top left

12.Duplicate 2 times and make a cluster

13.Merge the flower layers down so they are on one layer

14.Duplicate and mirror

15.Open one of the bead strings and resize 70%

16.Paste as new layer and add drop shadow

17.Move to the bottom

18.Open one of the fancy bows and resize 10%

19.Paste as new layer and add drop shadow

20.Move to the edge of the mask

21.Duplicate and move down a little

22.Duplicate each of these and mirror

23.Open one of the wordart stickers and resize 30%

24.Paste as new layer and add drop shadow

25.Move to the top between the flowers

26.Open one of the brad buttons and resize 5%

27.Paste as new layer and add drop shadow

28.Duplicate several times and place randomly round your tag

29.Open your tube and resize if necessary

30.Paste as new layer and add drop shadow

31.Move to the bottom

32.Add copyright and watermark

33.Add your name

34.You can merge visible



Hope you enjoyed my tutorial

Wednesday, April 22, 2009

Phoenix

This tutorial was written by Ivory on 04/22/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is Bashful Blush Kit By Moonbeams Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)
1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 16%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the flower sprays and resize 20%

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open a bead string and resize 20%

11.Paste as new layer and add drop shadow

12.Move to the bottom

13.Open one of the birds and resize 10%

14.Paste as new layer and add drop shadow

15.Move to top right

16.Duplicate and mirror

17.Open one of the flowers and resize 5%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place randomly round your tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Add copyright and watermark

23.Add your name

24.You can merge visible



Hope you enjoyed my tutorial


Greenery

This tutorial was written by Ivory on 04/21/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a close up tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is Bashful Blush Kit By Moonbeams Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 16%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the ivy and resize 20%

7.Paste as new layer and add drop shadow

8.Open one of the triple frames

9.Paste as new layer

10.Move to the bottom

11.Select Magic wand

12.Click inside each frame section until all are selected

13.Expand by 3

14.Open one of the papers and resize 16%

15.Paste as new layer

16.Invert/delete/select none

17.Move paper layer below frame layer

18.Highlight frame layer and add drop shadow

19.Merge Down

20.Open one of the flowers and resize 10%

21.Paste as new layer and add drop shadow

22.Duplicate 2 times

23.Place one in each frame

24.Highlight Mask layer

25.Open one of the sachets and resize 20%

26.Paste as new layer and add drop shadow

27.Move to top left

28.Duplicate and move to bottom right

29.Open your tube and resize if necessary

30.Paste as new layer,if using a close up make sure its behind the frames layer

31.Add drop shadow

20.Add copyright and watermark

21.Add your name

22.You can merge visible



Hope you enjoyed my tutorial

Summer Breeze

This tutorial was written by Ivory on 04/21/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Breeze Kit By Rieneke Designs and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)
1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open another paper and resize 70%

6.Cut a circle approx 350 x 350

7.Paste as new layer and add drop shadow

8.Open one of the flowers

9.Paste as new layer and add drop shadow

10.Move to the top right of the circle

11.Duplicate and mirror

12.Open one of the flower pots and resize 70%

13.Paste as new layer and add drop shadow

14.Open one of the brads and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate several times and place around your tag

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Move down

20.Add copyright and watermark

21.Add your name

22.You can merge visible



Hope you enjoyed my tutorial


Sunflowers

This tutorial was written by Ivory on 04/21/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Erica Reis which you can purchase HERE

Font of your choice
Scrapkit I used is Sunflowers Kit By Angel's Designs and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)
1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the sunflower doodles and resize 45%

6.Paste as new layer and add drop shadow

7.Move to the right slightly

8.Open one of the butterflys and resize 10%

9.Paste as new layer and add drop shadow

10.Duplicate several times and place around your tag

11.Open one of the bows and resize 10%

12.Paste as new layer and add drop shadow

13.Duplicate a few times and place around your tag

14.Open one of the sunflowers and resize 7%

15.Paste as new layer and add drop shadow

16.Duplicate a couple of times and place around your tag

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Move up

20.Add copyright and watermark

21.Add your name

22.You can merge visible



Hope you enjoyed my tutorial


Monday, April 20, 2009

Dudette

This tutorial was written by Ivory on 04/20/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a close up tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Girly Girl Kit By Southern Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop Shadow

6.Open one of the doodles and resize 58%

7.Paste as new layer and add drop shadow

8.Move down

9.Duplicate and flip

10.Open one of the bracket frames and resize 70%

11.Paste as new layer

12.Select magic wand

13.Click inside your frame

14.Selection/expand by 10

15.Open your close up tube and resize if necessary

16.Paste as new layer

17.Selections/invert/delete/select none

18.Add drop shadow

19.Move layer down below frame layer

20.Highlight frame layer and merge down

21.Open the pair of shoes and resize 20%

22.Paste as new layer and add drop shadow

23.Move to the bottom left

24.Open one of the perfume bottle and resize 15%

25.Paste as new layer and add drop shadow

26.Move to the shoes

27.Open one of the bows and resize 20%

28.Paste as new layer and add drop shadow

29.Duplicate and place one on top right corner and one on bottom right corner

30.Open the lipstick and resize 10%

31.Paste as new layer and add drop shadow

32.Move this to the bottom left

33.Open the lips and resize 20%

34.Paste as new layer and add drop shadow

35.Move to the top

36.Add copyright and watermark

37.Add your name

38.You can merge visible



Hope you enjoyed my tutorial

Apple Pie

This tutorial was written by Ivory on 04/20/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is Apple Pie Kit By Sky Scraps and can be purchased HERE



1.Open a new image 500x500 white

2.Open one of the pads and resize 75%

3.Paste as a new layer and add drop shadow

4.Open one of the flower garlands and resize 70%

5.Paste as new layer and add drop shadow

6.Move to the bottom of the pad

7.Duplicate and flip

8.Click on pad layer

9.Open one of the signs and resize 90%

10.Paste as new layer and add drop shadow

11.Move to the right side

12.Open one of the flowers and resize 70%

13.Paste as new layer and add drop shadow

14.Move to the left

15.Highlight top layer

16.Open one of the bows and resize 20%

17.Paste as new layer and add drop shadow

18.Duplicate several times and place around the edge of the pad

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Green Garden

This tutorial was written by Ivory on 04/20/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a close up tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Firefly Garden Kit By Classie Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open the circle frame and resize 80%

6.Paste as new layer

7.Click on magic wand

8.Click inside frame and expand by 3

9.Open a different paper and resize 60%

10.Paste as new layer

11.Selections/invert/delete/select none

12.Move paper layer below frame layer

13.Click inside your frame again and expand by 3

14.Open your close up tube and resize if necessary

15.Paste as new layer

16.Selections/invert/delete/slect none

17.Move tube layer below frame layer

18.Highlight frame layer and add drop shadow

19.Merge down and merge down again

20.Highlight mask layer

21.Open the bling doodle and resize 85%

22.Paste as new layer and add drop shadow

23.Highlight top layer

24.Open one of the flowers and resize 20%

25.Paste as new layer and add drop shadow

26.Place on the right side edge of the frame

27.Duplicate several times and place around the edge of the frame

28.Open one of the butterflys and resize 20%

29.Paste as new layer and add drop shadow

30.Move to the top left of the bling

31.Duplicate and mirror

32.Move this one to the bottom right of the bling

33.Open one of the dragonflys and resize 10%

34.Paste as new layer and add drop shadow

35.Move to the right, inside the frame area

36.Duplicate and mirror

37.Move this one to the other side of the frame

38.Add copyright and watermark

39.Add your name

40.You can merge visible



Hope you enjoyed my tutorial

Toxic

This tutorial was written by Ivory on 04/20/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Toxic Kit By Soxsational Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the doodle flowers and resize 95%

6.Paste as new layer and add drop shadow

7.Open one of the butterflys and resize 20%

8.Paste as new layer and add drop shadow

9.Place on top right corner of mask

10.Duplicate and place on bottom left corner

11.Open the toxic beads and resize 70%

12.Paste as new layer and add drop shadow

13.Free rotate 90 to the right

14.Move to the right side of the tag

15.Open the doodle heart

16.Paste as new layer and add drop shadow

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Add copyright and watermark

20.Add your name

21.You can merge visible



Hope you enjoyed my tutorial

Friday, April 17, 2009

Volley Girl

This tutorial was written by Ivory on 04/17/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Jose Cano which you can purchase HERE

Font of your choice
Scrapkit I used is Beachy Chic Kit By Loneshell Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight drop shadow

6.Open on of the doodles and resize 85%

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open one of the flowers and resize 10%

11.Paste as new layer and add drop shadow

12.Duplicate several times and place around the tag on the doodles

13.Open one of the bows and resize 10%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place around your tag

16.Open your tube and resize if necessary

17.Paste as new layer and add drop shadow

18.Open one of the folded ribbons and resize 50%

19.Paste as new layer and add drop shadow

20.Move to the bottom

21.Open one of the strings and resize 50%

22.Paste as new layer and add drop shadow

23.Move down over the ribbon

24.Add copyright and watermark

25.Add your name

26.You can merge visible

Glitter

This tutorial was written by Ivory on 04/17/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses VM Natural (Optional)
You will need a tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Spilled Glitter Kit By Butterfly Blush Designs and can be purchased HERE
I used this Mask(Just right click and save in your mask folder)
You can see the Animated Version HERE

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the spilled Glitters and resize 95%

6.Paste as new layer and add drop shadow

7.Duplicate and mirror

8.Open one of the flower strings and resize 80%

9.Paste as new layer and add drop shadow

10.Free rotate to the right 90

11.Move to the bottom

12.Open the glitter heart border and resize 50%

13.Paste as new layer and add drop shadow

14.Move to the right side

15.Duplicate and mirror

16.Open one of the glitter filled hearts

17.Paste as new layer and add drop shadow

18.Open one of the bows and reszie 20%

19.Paste as new layer and add drop shadow

20.Move to the top right

21.Duplicate and move down

22.Duplicate again and mirror

23.Duplicate and move up

24.Open your tube and resize if necessary

25.Paste as new layer and add drop shadow

23.Add copyright and watermark

24.Add your name

25.You can merge visible here or carry on for animated version

Animation optional

26.Open animation shop

27.Highlight glitter spill layer

28.Duplicate twice

29.Highlight bottom glitter spill layer

30.Effects/plugins/VM Natural/Sparkle/ Max size-14, All Colors-255, Rnd Color on/off-255, Random Seed-142/press ok

31.Highlight middle glitter spill layer

32.Effects/plugins/VM Natural/Sparkle/ Max size-14, All Colors-255, Rnd Color on/off-255, Random Seed-105/press ok

33.Highlight top glitter spill layer

34.Effects/plugins/VM Natural/Sparkle/ Max size-14, All Colors-255, Rnd Color on/off-255, Random Seed-231/press ok

35.Close out the top 2 Glitter layers

36.Edit/copy merged

37.Paste in animation shop

38.Back to Paint shop and close out the bottom layer and open middle layer

39.Copy merged,return to animation shop

40.Edit/paste/after current frame

41.Back to paint shop and close out middle layer and open top layer

42.Copy Merged and return to animation shop

43.Edit/paste/after current frame

44.View/Animation

45.Save animation




Hope you enjoyed my tutorial



Thursday, April 16, 2009

Painted Purple


This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is The Catwalk Collection - The Formal Line (Tagger) Kit By Ivorys Designz and can be purchased HERE



1.Open a new image 500x500 white

2.Open one of the pads and resize 90%

3.Paste as a new layer and add drop shadow

4.Open one of the sequinscatters and resize 60%

5.Paste and new layer and add Slight Drop Shadow

6.Open one of the glitter circles

7.Paste as new layer and add drop shadow

8.Open one of the perfume bottles and resize 30%

9.Paste as new layer and add drop shadow

10.Move to top right

11.Open the compact and resize 10%

12.Paste as new layer and add drop shadow

13.Move to the base of the bottle

14.Open one of the rings and resize 10%

15.Paste as new layer and add drop shadow

16.Move to the bottle

17.Open the brushes and choose 2 of them

18.Once removed resize 20%

19.Paste as new layer and add drop shadow

20.Move to the make up cluster

21.Open your tube and resize if necessary

22.Paste as new layer and add drop shadow

23.Open one of the stars and resize 20%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place randomly round your tag

26.Add copyright and watermark

27.Add your name

28.Merge visible




Hope you enjoyed my tutorial


What to Wear

This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is The Catwalk Collection - The Formal Line (Tagger) Kit By Ivorys Designz and can be purchased HERE



1.Open a new image 500x500 white

2.Open one of the pads and resize 50%

3.Paste as a new layer and add drop shadow

4.Open one of the doodles

5.Paste and new layer and add Slight Drop Shadow

6.Open one of the frames and resize 60%

7.Paste as new layer and add drop shadow

8.Open one of the dresses and resize 50%

9.Paste as new layer and add drop shadow

10.Free rotate 15 to the left and move to the top left

11.Open one of the purses and resize 30%

12.Paste as new layer and add drop shadow

13.Move to the dress

14.Open one of the hats and resize 30%

15.Paste as new layer and add drop shadow

16.Move to the dress and purse

17.Open one pair of shoes and resize 30%

18.Paste as new layer and add drop shadow

19.Move to the purse,but down a little

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Open one of the beaded wires and resize 50%

23.Paste as new layer and add drop shadow

24.Move to the base of the tube

25.Open one of the stars and resize 20%

26.Paste as a new layer and add drop shadow

27.Duplicate several times and place randomly round your tag

28.Select your text tool and write text of choice on the right side of your tag

29.Add copyright and watermark

30.Add your name

31.Merge visible




Hope you enjoyed my tutorial



Orange Crush

This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Ismael Rac which you can purchase HERE

Font of your choice
Scrapkit I used is The Catwalk Collection - Swimsuit & Lingerie Line(Tagger) Kit By Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight Drop Shadow

6.Open one of the cloud journalling and resize 40%

7.Paste as new layer and add drop shadow

8.Move to the top left

9.Select text tool and add text of choice

10.Add Drop shadow

11.Open one of the ribbons and resize 60%

12.Paste as new layer and add drop shadow

13.Open one of the flowers and resize 20%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place randomly round your tag

16.Open one of the eyelet bows and reszie 60%

17.Paste as new layer and add drop shadow

18.Move to the bottom left corner

19.Duplicate and mirror

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Add copyright and watermark

23.Add your name

24.Merge visible




Hope you enjoyed my tutorial



Thinking

This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Keith Garvey which you can purchase HERE

Font of your choice
Scrapkit I used is Tutti Frutti(Tagger) Kit By Scrapz By Christon and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)
1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight Drop Shadow

6.Open one of the cloud journalling and resize 40%

7.Paste as new layer and add drop shadow

8.Move to the top left

9.Select text tool and add text of choice

10.Add Drop shadow

11.Open one of the ribbons and resize 60%

12.Paste as new layer and add drop shadow

13.Open one of the flowers and resize 20%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place randomly round your tag

16.Open one of the eyelet bows and reszie 60%

17.Paste as new layer and add drop shadow

18.Move to the bottom left corner

19.Duplicate and mirror

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Place to the right

23.Move the tube layer down below the eyelet bow layer

24.Add copyright and watermark

25.Add your name

26.Merge visible




Hope you enjoyed my tutorial




Doesnt Play Well

This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Keith Garvey which you can purchase HERE

Font of your choice
Scrapkit I used is Caution (Tagger) Kit By Scrapz By Christon and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight Drop Shadow

6.Open a plain paper and resize 80%

7.Cut a circle approx 250 x 250

8.Paste as new layer and add drop shadow

9.Select text tool and add text of choice

10.Add Drop shadow

11.Open the caution ribbon and reszie 60%

12.Paste as new layer and add drop shadow

13.Move to the bottom

14.Open one of the bows and reszie 30%

15.Paste as new layer and add drop shadow

16.Move to the top of the mask

17.Open the caution sign and resize 5%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place around the mask

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Place to the right

23.Duplicate and mirror

24.Add copyright and watermark

25.Add your name

26.Merge visible




Hope you enjoyed my tutorial



Caution

This tutorial was written by Ivory on 04/16/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Keith Garvey which you can purchase HERE

Font of your choice
Scrapkit I used is Caution (Tagger) Kit By Scrapz By Christon and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)
1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight Drop Shadow

6.Open the caution sign and resize 50%

7.Paste as new layer and add drop shadow

8.Open one of the flowers and resize 20%

9.Paste as new layer and add drop shadow

10.Duplicate a few times and place randomly round your tag

11.Open one of the folded ribbons and resize 50%

12.Paste as new layer and add drop shadow

13.Place above the word "caution"

14.Duplicate and flip

15.Open one of the bead dangles and resize 70%

16.Paste as new layer and add drop shadow

17.Move to the left end of the top ribbon

18.Duplicate and mirror, moving to the right end of the top ribbon

19.Open one of the bows and reszie 15%

20.Paste as new layer and add drop shadow

21.Duplicate and place one on each of the dangle beads at the top

22.Open another flower and reszie 10%

23.Paste as new layer and add drop shadow

24.Place at the top corner of the sign

25.Duplicate and flip

26.Open your tube and resize if necessary

27.Paste as new layer and add drop shadow

28.Move to the right

29.Add copyright and watermark

30.Add your name

31.Merge visible




Hope you enjoyed my tutorial








Wednesday, April 15, 2009

Pink Fluff

This tutorial was written by Ivory on 04/15/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Jason Patterson which you can purchase HERE

Font of your choice
Scrapkit I used is Just A Little Crush Kit By Angels Designz and can be purchased HERE
I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add slight drop shadow

6.Open one of the circle frames and resize 60%

7.Paste as new layer and add drop shadow

8.Open one of the doodles and resize 20%

9.Paste as new layer and add drop shadow

10.Move layer down below frame layer and move to the left

11.Duplicate and mirror

12.Highlight frame layer

13.Open one of the pearls and resize 5%

14.Paste as new layer and add drop shadow

15.Duplicate a few times and place randomly round your tag

16.Open your tube and resize if necessary

17.Paste as new layer and add drop shadow

18.Select eraser and erase the parts of the base of the tube so its into the frame

19.Open one of the paper hearts and resize 2%

20.Paste as new layer and add drop shadow

21.Duplicate a few times and place randomly round your tag

22.Add copyright and watermark

23.Add your name

24.Merge visible




Hope you enjoyed my tutorial



Pretty Sexy

This tutorial was written by Ivory on 04/15/2009
Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters
You will need a tube of your choice.
I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice
Scrapkit I used is Pretty Girl Kit By Lone Shell Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 16%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the double frames and resize 15%

6.Paste as new layer

7.Select the magic wand and click inside one side of the frame/expand by 4

8.Open your closeup and resize if necessary

9.Paste as new layer, move to where the marching ants are

10.Selections/invert/delete select none

11.Move this layer below frame layer

12.Repeat steps 7 - 11 with the other side of the frame

13.Merge the frame layer down with the two tube layers

14.Open one of the ribbons and resize 10%

15.Paste as new layer and add drop shadow

16.Move to the top left of the frame

17.Duplicate and mirror

18.Move this one to the bottom right of the frame

19.Open one of the roses and resize 5%

20.Paste as new layer and add drop shadow

21.Duplicate several times and place randomly around your tag

22.Open your fullsize tube and resize if necessary

23.Paste as new layer and add drop shadow

23.Add copyright and watermark

24.Add your name

25.Merge visible




Hope you enjoyed my tutorial