Joy Of Hope

This tutorial was written by Ivory on 09/22/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is Joy Of Hope By Classie Creationz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the doodle

7.Paste as new layer and add drop shadow

8.Move to the bottom right

9.Duplicate and mirror

10.Open the flower bling and resize 75%

11.Paste as new layer and add drop shadow

12.Move up

13.Open one of the curled ribbons and resize 50%

14.Paste as new layer and add drop shadow

15.Move down to the doodles

16.Open one of the sunflowers and resize 10%

17.Paste as new layer and add drop shadow

18.Duplicate several times and place around your tag

19.Open one of the crystal stars and resize 40%

20.Paste as new layer and add drop shadow

21.Duplicate several times and place around your tag

22.Open your tube and resize if necessary

23.Paste as new layer and add drop shadow

24.Add copyright and watermark

25.Add your name

26.You can merge visible



Hope you enjoyed my tutorial

Rogue

This tutorial was written by Ivory on 09/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of deziningdiva which is available HERE

Font of your choice

Scrapkit I used is Butterfly Passion By Sametra Designs and can be purchased
HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Add drop shadow

6.Open one of the bows and resize 30%

7.Paste as new layer and add drop shadow

8.Place on one of the big stars in the mask

9.Duplicate and place one on each of the big stars

10.Open one of the buttons and resize 20%

11.Paste as new layer and add drop shadow

12.Duplicate and place one on each of the next size down stars of the mask

13.Open one of the flowers and resize 10%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place around your tag

16.Open one of the butterflys and resize 10%

17.Paste as new layer and add drop shadow

18.Place on one of the flowers at the top

19.Duplicate and mirror and move to one of the flowers

20.Open one of the circle frames and resize 85%

21.Paste as new layer and add drop shadow

22.Move layer down to below mask layer

23.Open your tube and resize if necessary

24.Paste as new layer and add drop shadow

25.Add copyright and watermark

26.Add your name

27.You can merge visible



Hope you enjoyed my tutorial

Skater Gurl

This tutorial was written by Ivory on 09/15/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Keith Garvey which is available HERE

Font of your choice

Scrapkit I used is Madness By Rieneke Designs and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Add drop shadow

6.Move down a little

7.Open one of the bead scatters and resize 80%

8.Paste as new layer and add drop shadow

9.Move to the left

10.Duplicate and mirror

11.Open one of the flower stems and resize 60%

12.Paste as new layer and add drop shadow

13.Move to the right

14.Open one of the heart pendants and resize 50%

15.Paste as new layer and add drop shadow

16.Move to the left

17.Open one of the flowers and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate a few times and place around your tag

20.Open one of the butterflys and resize 20%

21.Paste as new layer and add drop shadow

22.Move to one of the flowers

23.Open one of the ruffled ribbons and resize 35%

24.Paste as new layer and add drop shadow

25.Move down to the bottom of the tag

26.Open your tube and resize if necessary

27.Paste as new layer and add drop shadow

28.Move this layer down below ruffle layer

29.Add copyright and watermark

30.Add your name

31.You can merge visible



Hope you enjoyed my tutorial

Autumn Love

This tutorial was written by Ivory on 09/15/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using A personal Graphic

Font of your choice

Scrapkit I used is Autumn Lovin By Kirsty's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Add drop shadow

6.Lower opacity to 60

7.Open one of the frames and resize 75%

8.Paste as new layer

9.Select magic wand and click inside frame

10.Select/modify/expand by 3

11.Open your image and resize if necessary

12.Paste as new layer

13.Invert/delete/select none

14.Highlight frame layer and add drop shadow

15.Move graphic layer below frame layer

16.Highlight frame layer and merge down

17.Open the vine and resize 90%

18.Paste as new layer and add drop shadow

19.Move to the left and up a little

20.Open leaves 3 and resize 85%

21.Paste as new layer and add drop shadow

22.Free rotate 90 to the right

23.Move to the left

24.Open the mushroom and resize 40%

25.Paste as new layer and add drop shadow

26.Move to the bottom left ( not too far down)

27.Open heart 2 and resize 60%

28.Paste as new layer and add drop shadow

29.Move to the left

30.Open ribbon 5 and reszie 30%

31.Paste as new layer and add drop shadow

32.Move to the base of your cluster on the left

33.Add copyright and watermark

34.Add your name

35.You can merge visible



Hope you enjoyed my tutorial

Lil Bit Orange

This tutorial was written by Ivory on 09/11/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is A Lil Bit Geo By This and That by Tammy and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open flower 1 and resize 40%

7.Paste as new layer and add drop shadow

8.Move to the left

9.Duplicate and mirror

10.Move to the right and up a little

11.Open one of the flowers and resize 10%

12.Paste as new layer and add drop shadow

13.Duplicate a few times and place around your tag

14.Open one of the bows and resize 10%

15.Paste as new layer and add drop shadow

16.Duplicate a few times and place around your tag

17.Open your tube and resize if necessary

18.Paste as new layer and add drop shadow

19.Add copyright and watermark

20.Add your name

21.You can merge visible



Hope you enjoyed my tutorial

Lil Bit Blue

This tutorial was written by Ivory on 09/11/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is A Lil Bit Geo By This and That by Tammy and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open frame 3 and resize 50%

7.Paste as new layer and add drop shadow

8.Open one of the flowers and resize 10%

9.Paste as new layer and add drop shadow

10.Duplicate twice so you have 3

11.Place them in the top 3 sections of the frame (see my tag)

12.Open one of the bows and resize 10%

13.Paste as new layer and add drop shadow

14.Move to just below middle flower

15.Open one of the flowers and resize 5%

16.Paste as new layer and add drop shadow

17.Duplicate a few times and place around your tag

18.Open your tube and resize if necessary

19.Paste as new layer and add drop shadow

20.Add copyright and watermark

21.Add your name

22.You can merge visible



Hope you enjoyed my tutorial

Fallen Flowers

This tutorial was written by Ivory on 09/12/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Only Jo which is available HERE

Font of your choice

Scrapkit I used is Fall Splender By DezinersUtopia and can be purchased HERE



1.Open a new image 500x500 white

2.Open one of the bracket pads and resize 85%

3.Paste as a new layer on your white

4.Add drop shadow

5.Open one of the doodle art and resize 95%

6.Paste as new layer and add drop shadow

7.Move up

8.Open the flower row and resize 90%

9.Paste as new layer and add drop shadow

10.Flip and move to the bottom

11.Open one of the tags and resize 60%

12.Paste as new layer and add drop shadow

13.Move to top right

14.Open one of the buttons and resize 20%

15.Paste as new layer and add drop shadow

16.Move to the top of the tag over the hole

17.Open the snail and resize 20%

18.Paste as new layer and add drop shadow

19.Move to the bottom of the tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Move down

23.Add copyright and watermark

24.Add your name

25.You can merge visible



Hope you enjoyed my tutorial