Just Pink

This tutorial was written by Ivory on 04/28/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Jose Cano which you can purchase HERE

Font of your choice

Scrapkit I used is Burst Ur Bubble Kit By Crazy Lady Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow and move down

6.Open one of the diamond blings and resize 55%

7.Paste as new layer and add drop shadow

8.Move to the top of the mask

9.Open one of the flowers and resize 50%

10.Paste as new layer and add drop shadow

11.Move this layer down to below the mask layer

12.Duplicate this layer til theres enough flowers to go along the top of the mask

13.Highlight top layer

14.Open another flower and resize 20%

15.Paste as new layer and add drop shadow

16.Place at bottom right corner

17.Duplicate and place in the same corner

18.Duplicate 2 times more and place these two on the opposite corner

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Move to the left

22.Open one of the ribbons and resize 55%

23.Paste as new layer and add drop shadow

24.Free rotate 60 to the right

25.Move to the bottom

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

Volley Girl

This tutorial was written by Ivory on 04/17/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters

You will need a tube of your choice.

I am using the art of Jose Cano which you can purchase HERE

Font of your choice

Scrapkit I used is Beachy Chic Kit By Loneshell Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Slight drop shadow

6.Open on of the doodles and resize 85%

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open one of the flowers and resize 10%

11.Paste as new layer and add drop shadow

12.Duplicate several times and place around the tag on the doodles

13.Open one of the bows and resize 10%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place around your tag

16.Open your tube and resize if necessary

17.Paste as new layer and add drop shadow

18.Open one of the folded ribbons and resize 50%

19.Paste as new layer and add drop shadow

20.Move to the bottom

21.Open one of the strings and resize 50%

22.Paste as new layer and add drop shadow

23.Move down over the ribbon

24.Add copyright and watermark

25.Add your name

26.You can merge visible

Pretty Sexy

This tutorial was written by Ivory on 04/15/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Pretty Girl Kit By Lone Shell Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 16%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the double frames and resize 15%

6.Paste as new layer

7.Select the magic wand and click inside one side of the frame/expand by 4

8.Open your closeup and resize if necessary

9.Paste as new layer, move to where the marching ants are

10.Selections/invert/delete select none

11.Move this layer below frame layer

12.Repeat steps 7 - 11 with the other side of the frame

13.Merge the frame layer down with the two tube layers

14.Open one of the ribbons and resize 10%

15.Paste as new layer and add drop shadow

16.Move to the top left of the frame

17.Duplicate and mirror

18.Move this one to the bottom right of the frame

19.Open one of the roses and resize 5%

20.Paste as new layer and add drop shadow

21.Duplicate several times and place randomly around your tag

22.Open your fullsize tube and resize if necessary

23.Paste as new layer and add drop shadow

23.Add copyright and watermark

24.Add your name

25.Merge visible




Hope you enjoyed my tutorial

Glittered

This tutorial was written by Ivory on 03/23/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters

You will need a tube of your choice.

I am using the art of Jose Cano which you can purchase HERE

Font of your choice

Scrapkit I used is Butterfly Heaven By ChaDesignz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add slight drop shadow

6.Open crystal curtain and resize 255

7.Paste as new layer and add drop shadow

8.Move to the top of the mask square

9.Open the tassel and resize 60%

10.Paste as new layer and add drop shadow

11.Move to the top right corner

12.Open the pearl jewel and resize 20%

13.Paste as new layer and add drop shadow

14.Move to the bottom of the loop of the tassel

15.Open the jewel branch and resize 20%

16.Paste as new layer and add drop shadow

17.Move to the bottom right corner

18.Duplicate and mirror

19.Duplicate this layer and flip

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Open the jeweled border and resize 40%

23.Paste as new layer and add drop shadow

24.Move to the bottom

25.Open one of the swirled ribbons and reszie 40%

26.Paste as new layer and add drop shadow

27.Move to the bottom so it overlaps the jewel border a little

28.Open one of the butterflys and resize 10%

29.Paste as new layer and add drop shadow

30.Move to one end of the jewel border

31.Duplicate and mirror

32.Open one of the buttons and resize 20%

33.Paste as new layer and add drop shadow

34.Duplicate several times and place randomly round your tag

35.Add copyright and watermark

36.Add your name

37.Merge visible




Hope you enjoyed my tutorial

You Wish

This tutorial was written by Ivory on 02/17/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.

I am using the art by Joe Cano you can purchase his tubes HERE

Font of your choice

Scrapkit I used is Dot.Com by Vassia's Designs and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the frames and resize 85%

6.Paste as new layer

7.Click on your magic wand and click inside the frame

8.Selections/expand by 3

9.Open one of the papers and paste as new layer

10.Invert/delete

11.Move paper layer below frame layer

12.Highlight frame layer and merge down

13.Add drop shadow

14.Open one of the doodles

15.Paste as new layer and free rotate 15 left

16.Add drop shadow, move to the bottom of the tag

17.OPen one of the raindrops and resize 60%

18.Paste as new layer and add drop shadow

19.Move to the top of the frame

20.Open one of the bow flowers and resize 70%

21.Paste as new layer and add drop shadow

22.Move to the bottom right

23.Open one of the brackets and resize 80%

24.Paste as new layer and add drop shadow

25.Move to the left

26.Open one of the gem stars and resize 40%

27.Paste as new layer and add drop shadow

28.Duplicate a few times and place randomly around the tag

29.Open one of the word art

30.Paste as new layer and add drop shadow

31.Move up slightly

32.Merge visible

33.Add copyright and watermark

34.Add your name



Hope you enjoyed my tutorial

Girl Power

This tutorial was written by Ivory on 02/13/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.

I am using the art by Jose Cano you can purchase his tubes HERE

Font of your choice

Scrapkit I used is Girl Power by Stormy Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 18%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow of your choice

6.Move down

7.Open the ribbon binding and resize 5%

8.Paste as new layer and add drop shadow

9.Move to the left

10.Duplicate and mirror

11.Open one of the glitter doodles and resize 15%

12.Paste as new layer and add drop shadow

13.Move up a little

14.Open the blue dangly and resize 4%

15.Paste as new layer and add drop shadow

16.Move to the right

17.Open the heart and resize 2%

18.Paste as new layer and add drop shadow

19.Duplicate and place randomly on your tag

20.Open the white bow and resize 3%

21.Paste as new layer and add drop shadow

22.Duplicate and place randomly on your tag

23.Open your tube and resize if neccesary

24.Paste as new layer and add a drop shadow move to the left

25.Merge visible

26.Add copyright and watermark

27.Add your name



Hope you enjoyed my tutorial

Mardi Gras

This tutorial was written by Ivory on 02/09/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.

I am using the art by Jose Cano you can purchase his tubes HERE

Font of your choice

Scrapkit I used is Carnival (tagger) by Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow of your choice

6.Free Rotate 90 to right

7.Open one of the doodles and resize 85%

8.Paste as new layer and add drop shadow

9.Move to the left slightly

10.Open another doodle and resize 60%

11.Paste as new layer and add drop shadow

12.Mirror and move to the right

13.Open your tube and resize if neccessary

14.Paste as new layer and add drop shadow

15.Open one of the bead wires and resize 50%

16.Paste as new layer and add drop shadow

17.Move to the bottom

18.Open one of the bead dangles

19.Paste as new layer and add drop shadow

20.Move to the top right of the mask

21.Open one of the flowers and resize 20%

22.Paste as new layer and add drop shadow

23.Duplicate and place these two in a random place

24.Open a different flower and repeat step 21-23

25.You can do this with as many of the flowers as you wish

26.Open one of the brads and resize 30%

27.Paste as new layer and add drop shadow

28.Duplicate several times and place randomly round your tag

29.You can also do this with several colors of brads if you so wish

30.Merge visible

31.Add copyright and watermark

32.Add your name



Hope you enjoyed my tutorial

Easter Bunny

This tutorial was written by Ivory on 02/06/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.

I am using the art by Jose Cano you can purchase his tubes HERE

Font of your choice

Scrapkit I used is Hippity Hoppity (Tagger) by Ivorys Designz and can be purchased
HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your
choice and merge group

5.Add drop shadow of your choice

6.Open one of the flowers and resize by 30%

7.Paste as new layer and add drop shadow

8.Open another flower and resize by 20%

9.Paste as new layer and add drop shadow

10.Move them so they are on the edge of the mask

11.Duplicate each flower and alternate them round the edge of the mask (see
my tag)

12.Open one of the eggs and resize 50%

13.Paste as new layer and add drop shadow

14.Free rotate to the right 20

15.Open another egg resize 50%

16.Paste as new layer and add drop shadow

17.Free rotate to the left 20

18.Open one of the bows and resize 30%

19.Paste as new layer and add drop shadow

20.Move to the top left

21.Duplicate and move down a little

22.Duplicate and couple more times and mirror

23.Move to the right side

23.Open your tube and resize if neccessary

24.Paste as new layer and add a drop shadow

25.Merge visible

26.Add copyright and watermark

27.Add your name



Hope you enjoyed my tutorial

Crush

This tutorial was written by Ivory on 01/30/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.

I am using the art by Jose Cano you can purchase his tubes HERE

Font of your choice

Scrapkit I used is My Crush by Eclipse Creations and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow of your choice and move down

6.Open one of the heart dangles and resize 70%

7.Paste as new layer and add drop shadow

8.Move slightly to the top

9.Open one of the double hearts and resize 30%

10.Paste as new layer and add drop shadow

11.Move to the right (see my tag for placement)

12.Open one of the heart strings and resize by 80%

13.Paste as new layer and add drop shadow

14.Move to the bottom of the tag

15.Open one of the bows and resize 20%

16.Paste as new layer and add drop shadow

17.Move to the top right,so its over the rings of the chain

18.Duplicate and mirror

19.Open one of the curly ribbons and resize by 20%

20.Paste as new layer,add drop shadow free rotate 90 to the right

21.Duplicate and move one to the right and one to the left

22.Move the layer down so the ribbon is under the corresponding bow

23.Open your tube and resize if neccessary

24.Paste as new layer and add a drop shadow

25.Highlight the heart string layer and bring it up above the tube layer

26.Merge visible

27.Add copyright and watermark

28.Add your name



Hope you enjoyed my tutorial