Autumn Love

This tutorial was written by Ivory on 09/15/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using A personal Graphic

Font of your choice

Scrapkit I used is Autumn Lovin By Kirsty's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Add drop shadow

6.Lower opacity to 60

7.Open one of the frames and resize 75%

8.Paste as new layer

9.Select magic wand and click inside frame

10.Select/modify/expand by 3

11.Open your image and resize if necessary

12.Paste as new layer

13.Invert/delete/select none

14.Highlight frame layer and add drop shadow

15.Move graphic layer below frame layer

16.Highlight frame layer and merge down

17.Open the vine and resize 90%

18.Paste as new layer and add drop shadow

19.Move to the left and up a little

20.Open leaves 3 and resize 85%

21.Paste as new layer and add drop shadow

22.Free rotate 90 to the right

23.Move to the left

24.Open the mushroom and resize 40%

25.Paste as new layer and add drop shadow

26.Move to the bottom left ( not too far down)

27.Open heart 2 and resize 60%

28.Paste as new layer and add drop shadow

29.Move to the left

30.Open ribbon 5 and reszie 30%

31.Paste as new layer and add drop shadow

32.Move to the base of your cluster on the left

33.Add copyright and watermark

34.Add your name

35.You can merge visible



Hope you enjoyed my tutorial

Hot Pink

This tutorial was written by Ivory on 08/24/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which is available HERE

Font of your choice

Scrapkit I used is Bubblegum By Kirsty Scraps and can be purchased HERE


1.Open a new image 500x500 white

2.Open the pink mask and resize 85%

3.Paste as a new layer and add drop shadow

4.Open frame 3 and resize 80%

5.Paste as new layer

6.Click on magic wand and click inside the frame

7.Expand by 5

8.OPen your tube and resize if necessary

9.Paste as new layer

10.Invert and delete select none

11.Add drop shadow to your frame layer

12.Add drop shadow to your tube

13.Move tube layer down below frame layer

14.Highlight frame layer and merge down with tube layer

15.Open doodle 1 and resize 90%

16.Paste as new layer and add drop shadow

17.Move up a little

18.Move this layer below frame layer

19.Open dust 3 and resize 90%

20.Paste as new layer and add drop shadow

21.Free rotate 90 to the right and mirror

22.Move to the right side of the frame

23.Open dangle 1 and resize 50%

24.Paste as new layer and add drop shadow

25.Move to the right of the frame

26.Open flower 3 and resize 50%

27.Paste as new layer and add drop shadow

28.Move to the top right over the droplets

29.Open the butterfly and resize 20%

30.Paste as new layer and add drop shadow

31.Move to the flower

32.Add copyright and watermark

33.Add your name

34.You can merge visible



Hope you enjoyed my tutorial

I Know What You Are

This tutorial was written by Ivory on 06/01/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Dark Yarrow which you can purchase HERE

Font of your choice

Scrapkit I used is I know What you are by Kirstys Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open the bracket frame and resize 75%

6.Paste as new layer

7.Open one of the papers and resize 70%

8.Click on your magic wand and click inside the frame

9.Expand by 4

10.Paste paper as new layer

11.Invert/delete/select none

12.Move paper layer down below frame layer

13.Using your magic wand again click inside the frame again and expand by 4

14.Open your close up tube and resize if necessary

15.Paste as new layer

16.Invert/delete/select none

17.Move tube layer below frame

18.Highlight frame layer and add drop shadow

19.Merge frame layer down with tube layer and again with paper layer

20.Now you should have them all on one layer

21.With this layer highlighted click on the eye in your layer palette to close the layer while we work underneath it

22.Highlight the mask layer

23.Open one of the glitter circles

24.Paste as new layer and add drop shadow

25.Open ribbon 3 and resize 80%

26.Paste as new layer and add drop shadow

27.Move to the bottom of the tag

28.Click on the eye of the frame layer to reshow it and highlight this layer

29.Open ribbon 6 and resize 80%

30.Paste as new layer and add drop shadow

31.Move to the right side of the frame

32.OPen flower 3 and resize 40%

33.Paste as new layer and add drop shadow

34.Move to the bottom right and duplicate til you have 3 and arrange in a cluster

35.OPen the glass heart and resize 40%

36.Paste as new layer and add drop shadow

37.Move to the center of the cluster

38.Open one of the buttons and resize 20%

39.Paste as new layer and add drop shadow

40.Move to the center of the heart

41.Open the diamond

42.Paste as new layer and move to the top center of the frame

43.Open the light sparkles

44.Paste as new layer and move to the center of the diamond

45.Add copyright and watermark

46.Add your name

47.You can merge visible



Hope you enjoyed my tutorial

Framed In Silver

This tutorial was written by Ivory on 03/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Ooh October by Kirsty Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open the bracket frame and resize 70%

6.Paste as new layer

7.Click on the magic wand and click inside the frame

8.Expand by 5

9.Open your close up resize if necessary

10.Paste as new layer , Selection/invert/delete/select none

11.Move the tube layer below the frame layer

12.Highlight frame layer and merge down with tube

13.Add drop shadow

14.Open the heart string

15.Paste as new layer and add drop shadow

16.Move to the right

17.Open one of the leaf sprays and resize 40%

18.Paste as new layer and add drop shadow

19.Move to the bottom right

20.Open one of the greenery and resize 40%

21.Paste as new layer and add drop shadow

22.Move to the top left

23.Open one of the fabric hearts and resize 10%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place randomly round your tag

26.Open the dangly charm and resize 50%

27.Paste as new layer and add drop shadow

28.Move to the top left with the greenery

29.Open one of the bows and resize 10%

30.Paste as new layer and add drop shadow

31.Duplicate a few times and place one on the leaf spray and the rest of a few of the fabric hearts

32.Add copyright and watermark

33.Add your name

34.Merge visible




Hope you enjoyed my tutorial

Blue Mermaid

Cant Upload Animation without it cutting it off some

so you can see the animation HERE

This tutorial was written by Ivory on 03/18/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

This tutorial uses no filters

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Ooh October by Kirsty Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add slight drop shadow

6.Open the glitter bling and resize 98%

7.Paste as new layer

8.Open doodle 1 and resize 85%

9.Paste as new layer and add drop shadow

10.Move to the top

11.open one of the strings and resize 95%

12.Paste as new layer and add drop shadow

13.Move to the bottom

14.Open the gem heart

15.Paste as new layer and add drop shadow

16.Move to the top left

17.Open the feather and resize 40%

18.Paste as new layer and add drop shadow

19.Move to the top left,duplicate and mirror, arrange so the tips meet

20.Hightlight heart gem layer and move up over the feather layers

21.Open the dangly charm and resize 40%

22.Paste as new layer and add drop shadow

23.Move to the top right so the tip is on the tip of the doodle

24.Open one of the bows and resize 20%

25.Paste as new layer and add drop shadow

26.Move to the tip of the dangly charm

27.Open your tube and resize if necessary

28.Paste asn new layer and add drop shadow

29.Move to the bottom of the tag

30.Add copyright and watermark

31.Add your name

31.Merge visible or continue for animation

ANIMATION OPTIONAL

32.Open animation shop

33.Highlight Bling layer

34.Duplicate twice

35.Highlight bottom Bling layer

36.Adjust/add noise/Uniform checked/Monochrome checked/ Noise 45%/press ok

37.Highlight middle Bling layer

38.Adjust/add noise/Uniform checked/Monochrome checked/ Noise 40%/press ok

39.Highlight top Bling layer

40.Adjust/add noise/Uniform checked/Monochrome checked/ Noise 35%/press ok

41.Close out the top 2 Bling layers

42.Edit/copy merged

43.Paste in animation shop

44.Back to Paint shop and close out the bottom layer and open middle layer

45.Copy merged,return to animation shop

46.Edit/paste/after current frame

47.Back to paint shop and close out middle layer and open top layer

48.Copy Merged and return to animation shop

49.Edit/paste/after current frame

50.View/Animation

50.Save animation





Hope you enjoyed my tutorial

Blue Bling

This tutorial was written by Ivory on 01/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.I am using the art by Ismael Rac you can purchase his tubes HERE
Font of your choice

Scrapkit I used is Iced Love by Kirstys Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow of your choice

6.With your magic wand select the square area of the mask so you have marching ants

7.Paste the close up tube as new layer and when its positioned,selections/invert/delete/ select none

8.Lower opacity to 60%

9.Open stem and resize by 80%

10.Paste as a new layer and move to the flat edge of the mask

11.Add a drop shadow

12.Duplicate this layer and mirror

13.Open one of the bows

14.Resize by 20%

15.Paste as a new layer move down and add drop shadow (see my tag for placement)

16.Duplicate twice more and move them into position on the right hand stem

17.Open your tube and paste as a new layer, resizing if neccessary

18.Move to the left and add drop shadow

19.Open sparkle 2

20.Resize by 85%

21.Paste as new layer (see my tag for placement)

22.Add slight drop shadow

23.Merge visible

24.Add copyright and watermark

25.Add your name



Hope you enjoyed my tutorial

Dead Men

This tutorial was written by Ivory on 01/15/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.I am using the art by Scott Blair you can purchase his tubes HERE
Font of your choice

Scrapkit I used is Pretty Dirty Pirate by Kirsty Scrapz and can be
purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of
your choice and merge group

5.Add drop shadow of your choice

6.Open a scroll and paste as new layer

7.Add slight drop shadow and move down

8.Open the eye patch, paste as new layer

9.Image/mirror

10.Add drop shadow

11.Move it down over the scroll

12.Open two of the bottles and resize by 30%

13.Paste as new layer

14.Add slight drop shadow and move so they sit on the top of the
scroll

15.Open one of the ribbons and resize 15%

16.Paste as new layer and move over the bottles,move the bottles
closer together if you need to

17.Add drop shadow

18.Activate the scroll layer

19.Open the 3 brads

20.Resize by 30%

21.Paste several as new layers and move them into position

22.Add drop shadow

23.Activate top layer

24.Open your tube

25.Paste as new layer, resizing if neccessary

26.Move to the left

27.Add drop shadow

28.Merge visible

29.Add copyright and watermark

30.Add your name



Hope you enjoyed my tutorial

Love You

This tutorial was written by Ivory on 01/10/2009

Do not copy this tutorial and post through any kind of group or claim it as your own.

Resemblance to any other tutorial is strictly coincidental.
This tutorial uses no filters

You will need a tube of your choice.I am using the art by Keith Garvey you can purchase his tubes HERE
Font of your choice

Scrapkit I used is I Cant Love You by Kirsty Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize by 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow of your choice

6.Open the glitter and paste as new layer, add drop shadow of your choice

7.Open the ribbon heart and resize by 60% paste as a new layer add a drop shadow

8.Move to the top right.

9.Open the glitter lips and resize by 60%

10.Move to bottom Right

11.Open your tube and paste as new layer,resizing if neccesary

12.Add Drop shadow, move to the left

13.Merge visible

14.Add copyright and watermark

15.Add your name




Hope you enjoyed my tutorial