Spider Girl

This tutorial was written by Tamsin McAtee on 10/13/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Jo which is available HERE

Font of your choice

Scrapkit I used is Skeletal By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the spiderwebs

7.Paste as new layer and add drop shadow

8.Move to the right

9.Open one of the bows and resize 20%

10.Paste as new layer and add drop shadow

11.Duplicate a few times and place around the edge of the mask

12.Open one of the poxy buttons and resize 10%

13.Paste as new layer and add drop shadow

14.Duplicate a few times and place around your tag

15.Open the boy ghost and resize 20%

16.Paste as new layer and add drop shadow

17.Move to top right

18.Open your tube and resize if necessary

19.Paste as new layer and add drop shadow

20.Using your eraser tool erase round the bottom edge of the tube

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Calla Beauty

This tutorial was written by Ivory on 09/11/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Only Jo which is available HERE

Font of your choice

Scrapkit I used is Green Meadows By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Reduce opacity to about 80

6.Open clip frame and resize 50%

7.Paste as new layer

8.Click on your magic wand and click inside the frame

9.Selections/modify/expand by 5

10.Open your tube and resize if necessary

11.Paste as new layer

12.Invert/ delete/ select none

13.Add drop shadow to your tube layer

14.Highlight frame layer and add drop shadow

15.Move tube layer down below frame layer

16.Highlight frame layer and merge down

17.Open one of the physalis and resize 70%

18.Paste as new layer and add drop shadow

19.Move to the left

20.Open one of the calla lilies and resize 85%

21.Paste as new layer and add drop shadow

22.Move to the left

23.Open one of the double bows and resize 40%

24.Paste as new layer and add drop shadow

25.Move to the stems of the flowers

26.Open one of the gems and resize 10%

27.Paste as new layer and add drop shadow

28.Move to top right of the frame

29.Duplicate and place this one at the bottom right

30.Add copyright and watermark

31.Add your name

32.You can merge visible



Hope you enjoyed my tutorial

City Girl

This tutorial was written by Ivory on 08/28/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser included in the kit

Font of your choice

Scrapkit I used is Sexy Back By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the cityscape and resize 65%

7.Paste as new layer and add drop shadow

8.Move down a little

9.Open the hanging stars and resize 50%

10.Paste as new layer and add drop shadow

11.Move up to top of mask

12.OPen the wine glass and resize 40%

13.Paste as new layer and add drop shadow

14.Move to the bottom left

15.Open your tube and resize if necessary

16.Paste as new layer and add drop shadow

17.Open the street lamp and resize 70%

18.Paste as new layer and add drop shadow

19.Move to the right

20.Open one of the flowers and resize 10%

21.Paste as new layer and add drop shadow

22.Duplicate several times and place randomly around your tag

23.Add copyright and watermark

24.Add your name

25.You can merge visible



Hope you enjoyed my tutorial

Dragons Lair

This tutorial was written by Ivory on 08/25/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is Dragons Lair By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the dragons and resize 80%

6.Paste as new layer and add drop shadow

7.POpen one of the berry branches and resize 60%

8.Paste as new layer and add drop shadow

9.Move to the bottom right of the mask

10.Duplicate and mirror

11.Open your tube and resize if necessary

12.Paste as new layer and add drop shadow

13.Open one of the exotic blooms and resize 40%

14.Paste as new layer and add drop shadow

15.Move to the bottom of the tube

16.Duplicate and mirror and move together so they slightly overlap

17.Open one of the brads and resize 20%

18.Paste as new layer and add drop shadow

19.Duplicate a couple of times and place around your tag

20.Open one of the dragonflys and resize 20%

21.Paste as new layer and add drop shadow

22.Place where you like

23.Add copyright and watermark

24.Add your name

25.You can merge visible



Hope you enjoyed my tutorial

Candy Girl

This tutorial was written by Ivory on 08/20/2009

not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which is available HERE

Font of your choice

Scrapkit I used is Candy Kisses By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open raindrops and resize 55%

7.Paste as new layer and add drop shadow

8.Move to the top of the mask

9.Open one of the flower clusters and resize 60%

10.Paste as new layer and add drop shadow

11.Move to the top right of the mask

12.Duplicate and mirror

13.Open one of the suckers and resize 40%

14.Paste as new layer and add drop shadow

15.Free rotate 15 to the left

16.Place in the middle of the flower cluster

17.Duplicate and mirror

18.Open one of the velvet bow wraps and resize 55%

19.Paste as new layer and add drop shadow

20.Place in the middle across the mask

21.Open one of the flower stickers and resize 10%

22.Paste as new layer and add drop shadow

23.Duplicate several times and place around your tag

24.OPen one of the gingham bows and resize 10%

25.Paste as new layer and add drop shadow

26.Duplicate several times and place around your tag

27.Open your tube and resize if neceassry

28.Paste as new layer and add drop shadow

29.Add copyright and watermark

30.Add your name

31.You can merge visible



Hope you enjoyed my tutorial

Green Fairy

This tutorial was written by Ivory on 08/18/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is Memories Of You By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Add drop shadow

6.Open raindrops and resize 55%

7.Paste as new layer and add drop shadow

8.Move to the top of the mask

9.Open one of the rope wraps and resize 60%

10.Paste as new layer and add drop shadow

11.Place across the top of the rain

12.Open one of the floral branches and resize 70%

13.Paste as new layer and add drop shadow

14.Move to the left

15.Open one of the pearl flowers and resize 50%

16.Paste as new layer and add drop shadow

17.Move to the bottom left

18.Duplicate and mirror

19.Open one of the butterflys and resize 20%

20.Paste as new layer and add drop shadow

21.Duplicate and place both randomly on the flowers

22.Open one of the stars and resize 10%

23.Paste as new layer and add drop shadow

24.Duplicate several times and place around your tag

25.Open your tube and resize if neceassry

26.Paste as new layer and add drop shadow

27.Add copyright and watermark

28.Add your name

29.You can merge visible



Hope you enjoyed my tutorial

Princess Dreams

This tutorial was written by Ivory on 08/18/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Angie which is available HERE

Font of your choice

Scrapkit I used is Icey grape By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the carriage

7.Paste as new layer and add drop shadow

8.Move to the top

9.Open one of the ribbons and resize 60%

10.Paste as new layer and add drop shadow

11.Place across the wheels of the carriage

12.Open one of the brads and resize 15%

13.Paste as new layer and add drop shadow

14.Duplicate several times and place around your tag

15.Open one of the candles and reszie 40%

16.Paste as new layer and add drop shadow

17.Move to the bottom left

18.Open one of the stars and resize 10%

19.Paste as new layer and add drop shadow

20.Duplicate several times and place around your tag

21.Open one of the butterflys and resize 20%

22.Paste as new layer and add drop shadow

23.Move to the carriage

24.Open your tube and resize if necessary

25.Paste as new layer and move down

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

SWAK

This tutorial was written by Ivory on 08/05/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which is available HERE

Font of your choice

Scrapkit I used is SWAK By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the flowers

7.Paste as new layer and add drop shadow

8.Open one of the gem hearts

9.Paste as new layer and add drop shadow

10.Open one of the beaded strings and resize 50%

11.Paste as new layer and add drop shadow

12.Free rotate 90 to the right

13.Move to the right side

14.Open one of the buttons and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate several times and place around your tag

17.Open one of the flowers and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place around your tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Add copyright and watermark

23.Add your name

24.You can merge visible



Hope you enjoyed my tutorial

Blue Gingham

This tutorial was written by Ivory on 08/04/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which is available HERE

Font of your choice

Scrapkit I used is Candy Kisses By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Move down

7.Open one of the flower clusters

8.Paste as new layer and add drop shadow

9.Open one of the gingham bows and resize 20%

10.Paste as new layer and add drop shadow

11.Duplicate several times and place around your tag

12.Open one of the butterflys and resize 20%

13.Paste as new layer and add drop shadow

14.Place in place of your choice

15.OPen one of the velvet bows and resize 10%

16.Paste as new layer and add drop shadow

17.Duplicate several times and place around your tag

18.Open your tube and resize if necessary

19.Paste as new layer and add drop shadow

20.Move to the left

21.Open one of the ribbons and resize 50%

22.Paste as new layer and add drop shadow

23.Move to the bottom of the tube

24.Open one of the buttons and resize 15%

25.Paste as new layer and add drop shadow

26.Place at one end of the ribbon

27.Duplicate a few times and place at intervals along the ribbon

28.Add copyright and watermark

29.Add your name

30.You can merge visible



Hope you enjoyed my tutorial

Dream

This tutorial was written by Ivory on 07/18/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the Poser art of Only jo which is available HERE for free

Font of your choice

Scrapkit I used is Dream By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the banner word art

7.Paste as new layer and add drop shadow

8.Move to the top

9.Open one of the calla lillies and resize 70%

10.Paste as new layer and add drop shadow

11.Move to the left

12.Open one of the pins and resize 30%

13.Paste as new layer and add drop shadow

14.Move to the top right on the banner

15.Open one of the brads and resize 20%

16.Paste as new layer and add drop shadow

17.Duplicate a few times and place around the edge of the mask

18.Open one of the bows and resize 20%

19.Paste as new layer and add drop shadow

20.Dulicate a few times and place around your tag

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Temptation

This tutorial was written by Ivory on 07/18/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Keith Garvey which is available HERE

Font of your choice

Scrapkit I used is Turkish Delight By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the jeweled doodles

7.Paste as new layer and add drop shadow

8.Open one of the ribbon clusters and resize 40%

9.Paste as new layer and add drop shadow

10.Move to the right of the mask

11.Open one of the flowers and resize 30%

12.Paste as new layer and add drop shadow

13.Move to the middle of the ribbon cluster

14.Open one of the word clips and resize 20%

15.Paste as new layer and add drop shadow

16.Move to the middle of the flower

17.Open one of the beadstrings and resize 50%

18.Paste as new layer and add drop shadow

19.Move to the bottom of the mask

20.Open one of the brads and resize 20%

21.Paste as new layer and add drop shadow

22.Duplicate several times and place around your tag

23.Open one of the bows and resize 10%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place around your tag

26.open your tube and resize if necessary

27.Paste as new layer and add drop shadow

28.Add copyright and watermark

29.Add your name

30.You can merge visible



Hope you enjoyed my tutorial

Pen Pals

This tutorial was written by Ivory on 07/10/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the poser art of Only Jo which is available for free HERE

Font of your choice

Scrapkit I used is Vixen By Krissy's Scraps and can be purchased HERE

1.Open a new image 500x500 white

2.Open one of the parchments and resize 80%

3.Paste as a new layer and add drop shadow

4.Free rotate 90 to the right

5.Move down a little

6.Open one of the painted flowers and resize 60%

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open one of the envelopes and resize 30%

11.Paste as new layer and add drop shadow

12.Move to the right, just slightly below the flower

13.Free rotate 30 to the right

14.Open a different envelope and resize 30%

15.Paste as new layer and add drop shadow

16.Move it to the left, just slightly below the flower

17.Free rotate 30 to the left

18.Open one of the brads and resize 20%

19.Paste as new layer and add drop shadow

20.Duplicate and place one on each of the envelopes

21.Open one of the bead strings and resize 60%

22.Paste as new layer and add drop shadow

23.Move to the bottom of the parchment

24.Open your tube and resize if necessary

25.Paste as new layer and add drop shadow

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

Best Friends

This tutorial was written by Ivory on 07/10/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the poser art of Only Jo which is available for free HERE

Font of your choice

Scrapkit I used is Spring Thing By Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Free rotate 90 to the right

7.Open hanging beads and resize 40%

8.Paste as new layer and add drop shadow

9.Move to the top of the mask

10.Open one of the tulips and resize 40%

11.Paste as new layer and add drop shadow

12.Place to the left of the base of the mask

13.Duplicate and mirror

14.Open a different tulip and resize 40%

15.Paste as new layer and add drop shadow

16.Move it to the right slightly overlapping the other one

17.Duplicate and mirror

18.Open one of the whirlygigs and resize 40%

19.Paste as new layer and add drop shadow

20.Free rotate 45 to the left

21.Place middle left

22.Duplicate and mirror

23.Open one of the organza flowers and resize 10%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place around your tag

26.Open a different organza flower and resize 10%

27.Paste as new layer and add drop shadow

28.Duplicate several times and place around your tag

29.Open one of the bows and resize 10%

30.Paste as new layer and add drop shadow

31.Duplicate a few times and place around your tag

32.Open a different bow and resize 10%

33.Paste as new layer and add drop shadow

34.Duplicate a few times and place around your tag

35.Open your tube and resize if necessary

36.Paste as new layer and add drop shadow

37.Add copyright and watermark

38.Add your name

39.You can merge visible



Hope you enjoyed my tutorial

Fairy Blue

This tutorial was written by Ivory on 07/07/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which can be purchased HERE

Font of your choice

Scrapkit I used is Blue Bubblicious By Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the beaded swirls

7.Paste as new layer and add drop shadow

8.Move to the top right

9.Duplicate and mirror

10.Highlight top layer and merge down so both swirls are on one layer

11.Duplicate and flip

12.Open one of the star pendants

13.Paste as new layer and add drop shadow

14.Move to the top right

15.Open one of the blooms and resize 40%

16.Paste as new layer and add drop shadow

17.Move to the bottom right

18.Open one of the pearled flowers and resize 10%

19.Paste as new layer and add drop shadow

20.Duplicate several times and place around your tag

21.Open one of the bows and resize 20%

22.Paste as new layer and add drop shadow

23.Duplicate a few times and place around your tag

24.Add copyright and watermark

25.Add your name

26.You can merge visible



Hope you enjoyed my tutorial

Dreamy Pink

This tutorial was written by Ivory on 07/07/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the poser art of Only Jo which is free and is available HERE

Font of your choice

Scrapkit I used is Pink Bubblicious By Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the frames and resize 45%

7.Paste as new layer and add drop shadow

8.Open your tube and resize if necessary

9.Paste as new layer and add drop shadow

10.Place it so its mostly inside the frame

11.Open one of the blooms and resize 40%

12.Paste as new layer and add drop shadow

13.Mirror and place on the bottom left corner

14.Open one of the beaded swirls and resize 50%

15.Paste as new layer and add drop shadow

16.Move to the bloom

17.Open one of the bows and resize 20%

18.Paste as new layer and add drop shadow

19.Move to the beaded swirl

20.Open one of the star pendants and resize 70%

21.Paste as new layer and add drop shadow

22.Move to the top right corner

23.Open one of the acrylic flowers and resize 10%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place around your tag

26.Open one of the brad hearts and resize 10%

27.Paste as new layer and add drop shadow

28.Duplicate several times and place around your tag

29.Add copyright and watermark

30.Add your name

31.You can merge visible



Hope you enjoyed my tutorial

Paw Prints

This tutorial was written by Ivory on 07/02/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a Graphic of your choice.I am using my own photo

Font of your choice

Scrapkit I used is Doggy Dayz By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the frames and resize 40%

7.Paste as new layer

8.Select magic wand and click inside the frame

9.Expand by 3

10.Open your graphic and resize if necessary

11.Paste as new layer

12.Invert/delete/select none

13.Highlight frame layer and add drop shadow

14.Move graphic layer below frame layer

15.Highlight top layer and merge down

16.Highlight mask layer

17.Open one of the mud splats

18.Paste as new layer and add drop shadow

19.Move to top left

20.Highlight top layer

21.Open one of the paw prints and resize 20%

22.Paste as new layer and add drop shadow

23.Duplicate several times and place around your tag

24.Open one of the ribbon flowers and resize 20%

25.Paste as new layer and add drop shadow

26.Duplicate several times and place around your tag

27.Open one of the looped tassels and resize 70%

28.Paste as new layer and add drop shadow

29.Move to right corner of the frame

30.Open one of the bows and reszie 30%

31.Paste as new layer and add drop shadow

32.Move to the top of the loop

33.Open one of the dog bowls and resize 15%

34.Paste as new layer and add drop shadow

35.Move to the middle of the bow

36.Open one of the wordart and resize 50%

37.Paste as new layer and add drop shadow

38.Move to the bottom of the frame

39.Add copyright and watermark

40.Add your name

41.You can merge visible



Hope you enjoyed my tutorial

Coy

This tutorial was written by Ivory on 06/30/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the FTU poser art of Only Jo available HERE

Font of your choice

Scrapkit I used is Just Sheepy By Krissy Scraps and can be purchased HERE

I used these Masks(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

5.Open a new paper and resize 70%

6.Paste as new layer

7.Load mask (I have fit to canvas checked) in supplies or one of your choice
and merge group

8.Add drop shadow and resize 70%

9.Open your tube and resize if necessary

10.Paste as new layer and add drop shadow

11.Using your eraser, erase the the bottom part of the tube that comes over
the mask layer

12.Open one of the card flowers and resize 30%

13.Paste as new layer and add drop shadow

14.Move to the bottom left of the circle

15.Duplicate and move this one to the right and down a little so its
overlapping the other

16.Open one of the gingham flowers and resize 20%

17.Paste as new layer and add drop shadow

18.Move to the card flowers and create a cluster

19.Duplicate and move up in your cluster

20.Create this whole cluster again on the right side of the circle

21.Open one of the metal brads and resize 20%

22.Paste as new layer and add drop shadow

23.Duplicate several times and place around your tag

24.Open one of the buttons and resize 15%

25.Paste as new layer and add drop shadow

26.Duplicate several times and place around your tag

27.Open one of the bows and resize 20%

28.Paste as new layer and add drop shadow

29.Move to one end of the flower cluster

30.Duplicate and mirror

31.Add copyright and watermark

32.Add your name

33.You can merge visible



Hope you enjoyed my tutorial

Fresh

This tutorial was written by Ivory on 06/12/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
You will need a tube of your choice.

I am using the art of Keith Garvey which you can purchase HERE

Font of your choice

Scrapkit I used is Naturally Fresh By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the ivy

7.Paste as new layer and add drop shadow

8.Move to the top right

9.Open one of the corset ribbons and resize 50%

10.Paste as new layer and add drop shadow

11.Move to the left

12.Open one of the drapes and resize 55%

13.Paste as new layer and add drop shadow

14.Move to the top of the ivy

15.Open one of the hangers and resize 60%

16.Paste as new layer and add drop shadow

17.Move to the drape

18.Open one of the ribbon clusters and resize 30%

19.Paste as new layer and add drop shadow

20.Move to the top of the hanger

21.Open one of the lace bows and resize 30%

22.Paste as new layer and add drop shadow

23.Move to the middle of the ribbon cluster

24.Open one of the flowers and resize 10%

25.Paste as new layer and add drop shadow

26.Duplicate several times and place around around your tag

27.Open your tube and resize if necessary

28.Paste as new layer and add drop shadow

29.Add copyright and watermark

30.Add your name

31.You can merge visible



Hope you enjoyed my tutorial

Groovy

This tutorial was written by Ivory on 06/02/2009Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.
You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Groovylicious By Krissys Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open the string frame

7.Paste as new layer

8.Select magic wand and click inside the frame

9.Expand by 4

10.Open your close up tube and resize if necessary

11.Paste as new layer

12.Invert/delete/select none

13.Add drop shadow

14.Move tube layer below frame layer

15.Select frame layer and add drop shadow

16.Merge frame layer down with tube layer

17.Highlight mask layer

18.Open one of the painted flowers

19.Paste as new layer and add drop shadow

20.Move to top right

21.Duplicate/mirror/flip

22.Open one of the bows and resize 20%

23.Paste as new layer and add drop shadow

24.Duplicate a few times and place around your tag

25.Open the bracelet and resize 30%

26.Paste as new layer and add drop shadow

27.Move to the lower left of the frame

28.Select the eraser tool and erase the part of the bracelet so it looks looped round the frame

29.Open the decorative wire and resize 60%

30.Paste as new layer and add drop shadow

31.Move to the bottom of the tag

32.Add copyright and watermark

33.Add your name

34.You can merge visible



Hope you enjoyed my tutorial

Green Goddess

This tutorial was written by Ivory on 05/29/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Kiwi Burst by Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the buttons and resize 20%

7.Paste as new layer and add drop shadow

8.Duplicate til you have enough for each blob in the corner of the mask and place them over them

9.Open one of the hanging beads and resize 35%

10.Paste as new layer and add drop shadow

11.Move to the top of the square of the mask

12.Open one of the bows and resize 20%

13.Paste as new layer and add drop shadow

14.Duplicate til you have 8

15.Place them at intervals down the 2 strips of the mask

16.Open one of the eyelet ribbons and resize 70%

17.Paste as new layer and add drop shadow

18.Move to the bottom of the mask square

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Open one of the strings and resize 90%

22.Paste as new layer and add drop shadow

23.Move to the bottom

24.Open one of the flowers and resize 10%

25.Paste as new layer and add drop shadow

26.Duplicate a few times and place along the string

27.Add copyright and watermark

28.Add your name

29.You can merge visible



Hope you enjoyed my tutorial