Green Goddess

This tutorial was written by Ivory on 05/29/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Kiwi Burst by Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add drop shadow

6.Open one of the buttons and resize 20%

7.Paste as new layer and add drop shadow

8.Duplicate til you have enough for each blob in the corner of the mask and place them over them

9.Open one of the hanging beads and resize 35%

10.Paste as new layer and add drop shadow

11.Move to the top of the square of the mask

12.Open one of the bows and resize 20%

13.Paste as new layer and add drop shadow

14.Duplicate til you have 8

15.Place them at intervals down the 2 strips of the mask

16.Open one of the eyelet ribbons and resize 70%

17.Paste as new layer and add drop shadow

18.Move to the bottom of the mask square

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Open one of the strings and resize 90%

22.Paste as new layer and add drop shadow

23.Move to the bottom

24.Open one of the flowers and resize 10%

25.Paste as new layer and add drop shadow

26.Duplicate a few times and place along the string

27.Add copyright and watermark

28.Add your name

29.You can merge visible



Hope you enjoyed my tutorial

VooDoo Doll

This tutorial was written by Ivory on 05/29/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Grape Rush by Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the frames and resize 50%

6.Paste as new layer

7.Open a different paper and resize 70%

8.Use magic wand and click inside the frame

9.Expand by 4

10.Paste paper as new layer

11.Invert/delete/select none

12.Move paper layer below frame layer

13.Highlight frame layer

14.Add drop shadow

15.Merge frame layer down with paper layer

16.Open one of the corset ribbons and resize 50%

17.Paste as new layer and add drop shadow

18.Move to the left of the frame

19.Open one of the metal doodles and resize 70%

20.Paste as new layer and add drop shadow

21.Move to the bottom right

22.Open one of the voodoo dolls and resize 40%

23.Paste as new layer and add drop shadow

24.Mirror and move to the bottom right

25.Open one of the strings and resize 95%

26.Paste as new layer and add drop shadow

27.Flip and move to the top of the tag

28.Open one of the flowers and resize 10%

29.Paste as new layer and add drop shadow

30.Duplicate several times and place around your tag

31.Add copyright and watermark

32.Add your name

33.You can merge visible



Hope you enjoyed my tutorial

Flutter Blue

This tutorial was written by Ivory on 05/28/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Flutterby Blue by Butterfly Blush Designs and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add a drop shadow

6.Open one of the circle frames and resize 85%

7.Paste as new layer

8.Open one of the apple blossoms

9.Highlight mask layer

10.Paste as new layer and add drop shadow

11.Move to the right

12.Duplicate and mirror

13.Highlight frame layer

14.Select magic wand and click inside the frame

15.Expand by 5

16.DOpen your close up tube and resize if necessary

17.Paste as new layer

18.Invert/delete/select none

19.Add drop shadow

20.Move tube layer below frame layer

21.Highlight frame layer and add drop shadow

22.Merge down with tube layer

23.Open one of the folded ribbons and resize 60%

24.Paste as new layer and add drop shadow

25.Move to base of the tag

26.Open one of the lace bows and resize 30%

27.Paste as new layer and add drop shadow

28.Move to top right of the frame

29.Duplicate and mirror

30.Open one of the butterflys and resize 40%

31.Paste as new layer and add drop shadow

32.Move to one of the flowers

33.Duplicate mirror and move to a different flower

34.Add copyright and watermark

35.Add your name

36.You can merge visible



Hope you enjoyed my tutorial

Cherry Bomb

This tutorial was written by Ivory on 05/28/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Keith Garvey which you can purchase HERE

Font of your choice

Scrapkit I used is Cherry Bomb by Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the metal doodles

6.Paste as new layer and add drop shadow

7.Open one of the beaded swirls

8.Paste as new layer and add drop shadow

9.OPen one of the painted flowers and resize 40%

10.Paste as new layer and add drop shadow

11.Move to the top right

12.Duplicate and mirror

13.Move this one back to the other flower so they overlap

14.Open one of the bows and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate several times and place around your tag

17.Open one of the small flowers and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place around your tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Move to the left

23.Add copyright and watermark

24.Add your name

25.You can merge visible



Hope you enjoyed my tutorial

Poison

This tutorial was written by Ivory on 05/25/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Poison Rock By Missy Lynn Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the skull frame and resize 80%

7.Paste as new layer

8.Select your magic wand and click inside the frame

9.Open your tube and resize if necessary

10.Paste as new layer

11.Selections/invert/delete/select none

12.Add drop shadow to tube

13.Move tube layer down below frame layer

14.Add drop shadow to frame layer

15.Merge frame layer down with tube layer

16.Move down a little

17.Highlight mask layer

18.Open the heart doodle

19.Paste as new layer and add drop shadow

20.Move up a little

21.Highlight top layer

22.Open one of the curly ribbons and resize 80%

23.Paste as new layer and add drop shadow

24.Move to the right side

25.Open one of the records and resize 40%

26.Paste as new layer and add drop shadow

27.Move to the top left

28.Duplicate and resize this one 70%

29.Move down and to the right a little

30.Duplicate and move to the left a little

31.Open one of the flowers and resize 10%

32.Paste as new layer and add drop shadow

33.Move to the middle of the record cluster

34.Open one of the tags

35.Paste as new layer and add drop shadow

36.Select text tool and write text of your choice on the tag and add drop shadow

37.Merge text layer down with tag

38.Free rotate tag 20 left

39.Move up a little so its stapled on the record

40.Add copyright and watermark

41.Add your name

42.You can merge visible



Hope you enjoyed my tutorial

Anarchy

This tutorial was written by Ivory on 05/25/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Blueberry Blast By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the scattered beads

7.Paste as new layer and add drop shadow

8.Move to the top left

9.Duplicate and mirror

10.Open one of the beaded swirls

11.Paste as new layer and add drop shadow

12.Move to the top left

13.Duplicate and mirror

14.Open one of the painted flowers and resize 50%

15.Paste as new layer and add drop shadow

16.Move to the top middle

17.Duplicate and move slightly down and to the right

18.Duplicate this one and mirror

19.Open one of the bows and resize 20%

20.Paste as new layer and add drop shadow

21.Duplicate a few times and place randomly round your tag

22.Open one of the strings and resize 95%

23.Paste as new layer and add drop shadow

24.Move to the bottom

25.Open one of the flowers and resize 20%

26.Paste as new layer and add drop shadow

27.Duplicate and place them on the string

28.Open your tube and resize if necessary

29.Paste as a new layer and add a drop shadow

30.Add copyright and watermark

31.Add your name

32.You can merge visible



Hope you enjoyed my tutorial

Problem

This tutorial was written by Ivory on 05/24/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Rockin Attitude By Scraps With Attitude Collab and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 14%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open one of the ribbons and resize 15%

7.Paste as new layer and add drop shadow

8.Move to the top left

9.Open one of the stars and resize 10%

10.Paste as new layer and add drop shadow

11.Open one of the bows and resize 5%

12.Paste as new layer and add drop shadow

13.Move to the middle of the star

14.Merge down

15.Move to the top right

16.Duplicate and move to the bottom left

17.Open a different color star and resize 10%

18.Paste as new layer and add drop shadow

19.Open a different color bow and resize 5%

20.Paste as new layer and add drop shadow

21.Move to the middle of the star

22.Merge down and move to the top left

23.Duplicate and move to the bottom right

24.Open one of the flowerts and resize 10%

25.Paste as new layer and add drop shadow

26.Move to the ribbon

27.Duplicate and move to a different place on the ribbon

28.Open one of the word plates and resize 30%

29.Paste as a new layer and add a drop shadow

30.Move up a little

31.Open one of the stapled curly ribbons and resize 10%

32.Paste as new layer and add drop shadow

33.Move to the word plate bottom right corner

34.Open one of the bows and resize 5%

35.Paste as new layer and add drop shadow

36.Duplicate a few times and place around your tag

37.Open one of the brads and resize 5%

38.Paste as new layer and add drop shadow

39.Duplicate several times and place around your tag

40.Open your tube and resize if necessary

41.Paste as new layer and move down

42.Add copyright and watermark

43.Add your name

44.You can merge visible



Hope you enjoyed my tutorial

Canada Babe

This tutorial was written by Ivory on 05/21/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is American Moments By Crazy Lady Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add a drop shadow,move down

6.Open one of the bow doodles and resize 60%

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open one of the bows and resize 40%

11.Paste as new layer and add drop shadow

12.Move to the top right of the mask

13.Duplicate and mirror

14.Open one of the stars and resize 10%

15.Paste as new layer and add drop shadow

16.Duplicate several times and place around your tag

17.Open one of the flowers and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place around your tag

20.Open one of the bows and resize 10%

21.Paste as new layer and add drop shadow

22.Duplicate several times and place around your mask

23.Open your tube and resize if necessary

24.Paste as new layer and add drop shadow

25.Move to the left

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

Beach Girl

This tutorial was written by Ivory on 05/21/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of FedX2K5 which you can purchase HERE

Font of your choice

Scrapkit I used is By The SeaSide By Soxsational Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open one of the meshes and resize 90%

6.Paste as new layer and add drop shadow

7.Move to the top left

8.Open the starfish

9.Paste as new layer and add drop shadow

10.Open the seagull and resize 50%

11.Paste as new layer and add drop shadow

12.Move to the top right

13.Open the butterflys and resize 80%

14.Paste as new layer and add drop shadow

15.Move to top left

16.Open one of the bead words and reszie 60%

17.Paste as new layer and add drop shadow

18.Move to the top of the mask

19.Open the crab and resize 30%

20.Paste as new layer and add drop shadow

21.Move to the bottom right

22.Open your tube and resize if necessary

23.Paste as new layer and add drop shadow

24.Move to the left a little

25.Open the oars and resize 80%

26.Paste as new layer and add drop shadow

27.Move to the bottom of the tube

28.Open one of the fishes and resize 20%

29.Paste as new layer and add drop shadow

30.Move to the left oar

31.Duplicate and mirror

32.Add copyright and watermark

33.Add your name

34.You can merge visible



Hope you enjoyed my tutorial

Lemon Splash

This tutorial was written by Ivory on 05/21/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Lemon Splash By Krissy Scraps and can be purchased
HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your
choice and merge group

5.Add Drop shadow

6.Open one of the hanging beadsand resize 50%

7.Paste as new layer and add slight drop shadow

8.Move to the top of the mask

9.Open cats tail and resize 60%

10.Paste as new layer and add drop shadow

11.Move to the left

12.Duplicate and mirror

13.Open one of the bows and resize 30%

14.Paste as new layer and add drop shadow

15.Duplicate twice and place all 3 along the top of the mask

16.Open one of the flowers and resize 10%

17.Paste as new layer and add drop shadow

18.Duplicate and place them inbetween the bows

19.Open the string and resize 95%

20.Paste as new layer and add drop shadow

21.Move to the bottom of the tag

22.Open your tube and resize if necessary

23.Paste as new layer and add drop shadow

24.Move to the bottom of the tag

25.Add copyright and watermark

26.Add your name

27.You can merge visible



Hope you enjoyed my tutorial

Blue Fantasy

This tutorial was written by Ivory on 05/21/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Imagination Du Mien By Crazy Lady Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 90%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the rainbow and resize 50%

7.Paste as new layer and add slight drop shadow

8.Move to the top of the mask

9.Open the sunswirldoodle

10.Paste as new layer and add drop shadow

11.Open one of the flowers and resize 25%

12.Paste as new layer and add drop shadow

13.Open one of the butterflies and resize 20%

14.Paste as new layer and add drop shadow

15.Duplicate and place both on the right on the doodle

16.Open a different flower and resize 10%

17.Paste as new layer and add drop shadow

18.Duplicate several times and place randomly around your tag

19.Open your tube and resize if necessary

20.Paste as new layer and add drop shadow

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Orange Splash

This tutorial was written by Ivory on 05/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Orange Sorbet By Krissy Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

and move down

5.Open one of the hanging beads and resize 50%

6.Paste as new layer and add drop shadow

7.Move to the mask

8.Open the string and resize 95%

9.Paste as new layer and add drop shadow

10.Flip and move above the mask

11.Open one of the flowers and resize 30%

12.Paste as new layer and add drop shadow

13.Duplicate and place one on each end of the string

14.Open one of the bows and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate and place on each end of the mask

17.Open one of the small flowers and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate a few times and place along the bottom edge of the mask

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Pom Poms

This tutorial was written by Ivory on 05/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Tooty Frooty By Twinky and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Open journal 1 and resize 80%

6.Paste as new layer and add drop shadow

7.Open one of the ribbon hearts and resize 85%

8.Paste as new layer and add drop shadow

9.Move to the right

10.Highlight the journal layer

11.Open one of the stitching and resize 40%

12.Paste as new layer and add drop shadow

13.Duplicate and mirror

14.Highlight top layer

15.Open one of the patchwork flowers and resize 40%

16.Paste as new layer and add drop shadow

17.Move to the middle of the heart

18.Open your tube and resize if necessary

19.Paste as new layer and add drop shadow

20.Move to the left

21.Open one of the ribbon wraps and resize 65%

22.Paste flip and add drop shadow

23.Move to the base of the tube

24.Add copyright and watermark

25.Add your name

26.You can merge visible



Hope you enjoyed my tutorial

Tooty Frooty

This tutorial was written by Ivory on 05/19/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Tooty Frooty By Twinky and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open one of the doodles

7.Paste as new layer and add drop shadow

8.Move to the right

9.Duplicate and mirror

10.Open one of the flowers and resize 20%

11.Paste as new layer and add drop shadow

12.Duplicate 3 times and place each one on the swirl of the doodle

13.Open one of the buttons and resize 10%

14.Paste as new layer and add drop shadow

15.Duplicate several times and place around your tag

16.Open your tube and resize if necessary

17.Paste as new layer and add drop shadow

18.Open one of the beadstrings and resize 60%

19.Paste as new layer and add drop shadow

20.Move to the base of the tube

21.Add copyright and watermark

22.Add your name

23.You can merge visible



Hope you enjoyed my tutorial

Ice Cool

This tutorial was written by Ivory on 05/16/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Cool Ice By Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open one of the metal doodles

7.Paste as new layer and add drop shadow

8.Open one of the hanging beads and resize 40%

9.Paste as new layer and add drop shadow

10.Move to the top of the mask

11.Open one of the ribbonwraps and resize 40%

12.Paste as new layer and add drop shadow

13.Move to the top of the beads

14.Open one of the flowers and resize 10%

15.Paste as new layer and add drop shadow

16.Duplicate a couple of times and place around your tag

17.Open one of the bows and resize 20%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place randomly around your tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Open one of the strings and resize 95%

23.Paste as new layer and add drop shadow

24.Move to the bottom of the tag

25.Add copyright and watermark

26.Add your name

27.You can merge visible



Hope you enjoyed my tutorial

Drama Queen

This tutorial was written by Ivory on 05/14/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Bad Girlfriend By Made By Justine and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the glitter papers in the kit

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open one of the chrome elements swirlies

7.Paste as new layer and add drop shadow

8.Move to the top

9.Duplicate/flip/mirror

10.Open your close up and resize if necessary

11.Paste as new layer and add drop shadow

12.Open the content sign and resize 40%

13.Paste as new layer and add drop shadow

14.Move to the middle bottom of the tag

15.Open one of the ribbons and resize 40%

16.Paste as new layer and add drop shadow

17.Move to the base of the tube

18.Open one of the stickers and resize 50%

19.Paste as new layer and add drop shadow

20.Move to the right

21.Duplicate and mirror

22.Open one of the buttons and resize 30%

23.Paste as new layer and add drop shadow

24.Move to the top right

25.Open one of the lips and resize 50%

26.Paste as new layer and add drop shadow

27.Place on the right end of the ribbon

28.Duplicate and mirror

28.Add copyright and watermark

29.Add your name

30.You can merge visible



Hope you enjoyed my tutorial

Star Crazy

This tutorial was written by Ivory on 05/14/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Magic Of The Stars By Tinas Magical Scrap World and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 80%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open one of the mini stars and resize 97%

7.Paste as new layer and add drop shadow

8.Open one of the picot ribbons and resize 40%

9.Paste as new layer and add drop shadow

10.Move to the right of the mask

11.Duplicate and mirror

12.Open one of the star bows and resize 20%

13.Paste as new layer and add drop shadow

14.Move to the right bottom of the mask

15.Duplicate and mirror

16.Open your tube and resize if necessary

17.Paste as new layer and add drop shadow

18.Place to the left

19.Open one of the star ribbons and resize 60%

20.Paste as new layer and add drop shadow

21.Move to the base of the tube

22.Open one of the star hangers and resize 30%

23.Paste as new layer and add drop shadow

24.Move to the right

25.Open one of the stars and resize 10%

26.Paste as new layer and add drop shadow

27.Duplicate several times and place around your tag

28.Add copyright and watermark

29.Add your name

30.You can merge visible



Hope you enjoyed my tutorial

Plum Delight

This tutorial was written by Ivory on 05/14/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Plum Delight By Krissy's Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the bead scatter

7.Paste as new layer and add drop shadow

8.Open one of the strings

9.Paste as new layer and add drop shadow

10.Move to the bottom

11.Open one of the bows and resize 20%

12.Paste as new layer and add drop shadow

13.Duplicate a few times and place around your tag

14.Open one of the flowers and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate a couple of times and place around your tag

17.Open a different flower and resize 10%

18.Paste as new layer and add drop shadow

19.Duplicate several times and place randomly around your tag

20.Open your tube and resize if necessary

21.Paste as new layer and add drop shadow

22.Add copyright and watermark

23.Add your name

24.You can merge visible



Hope you enjoyed my tutorial

Princess

This tutorial was written by Ivory on 05/12/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is If The Crown Fits By Scrappin With Lil Ole Me and can be purchased HERE

1.Open a new image 500x500 white

2.Open the journal papers and resize 75%

3.Paste as a new layer and add drop shadow

4.Move to the top right

5.Open one of the dangles and resize 70%

6.Paste as new layer and add drop shadow

7.Move to the right

8.Open one of the wraps and resize 55%

9.Paste as new layer and add drop shadow

10.Move to the right edge

11.Open one of the bows and resize 30%

12.Paste as new layer and add drop shadow

13.Move to the top of the wrap

14.Highlight journal layer

15.Open the fairy dust and resize 50%

16.Paste as new layer and add drop shadow

17.Highlight top layer

18.Open one of the flowers and resize 50%

19.Paste as new layer and add drop shadow

20.Move to middle bottom

21.Open the mirror sticker and resize 40%

22.Paste as new layer and add drop shadow

23.Move to the top right

24.Select text tool

25.Add new layer and write text of your choice

26.Add drop shadow

27.Open the crown sticker and resize 5%

28.Paste as new layer add drop shadow

29.Move to the top of the mirror above the words

30.Highlight top layer

31.Open one of the ribbons and resize 10%

32.Paste as new layer and add drop shadow

33.Duplicate a couple of times and place around the frame

34.Open one of the butterflys and resize 10%

35.Paste as new layer and add drop shadow

36.Move to the top left

37.Duplicate and mirror

38.Move to the bottom right

39.Add copyright and watermark

40.Add your name

41.You can merge visible



Hope you enjoyed my tutorial

Mirror Mirror

This tutorial was written by Ivory on 05/12/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Irina Grank which you can purchase HERE

Font of your choice

Scrapkit I used is Royally Enchanted By Crazy Lady Scraps and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the curly frame amd resize 60%

7.Paste as new layer

8.Open your tube and resize if necessary

9.Paste as new layer

10.Using your eraser tool erase the bottom part of the tube is its inside the frame

11.Add drop shadow

12.Open one of the flowers and resize 10%

13.Paste as new layer and add drop shadow

14.Move to the base of the tube and frame

15.Duplicate a few times and place along the base of the tube

16.Open a different color flower and resize 5%

17.Paste as new layer and add drop shadow

18.Move to the flowers at the bottom

19.Duplicate several times and place along the edge of the other flowers

20.Highlight mask layer

21.Open the mirror sticker and resize 40%

22.Paste as new layer and add drop shadow

23.Move to the top right

24.Select text tool

25.Add new layer and write text of your choice

26.Add drop shadow

27.Open the crown sticker and resize 5%

28.Paste as new layer add drop shadow

29.Move to the top of the mirror above the words

30.Highlight top layer

31.Open one of the ribbons and resize 10%

32.Paste as new layer and add drop shadow

33.Duplicate a couple of times and place around the frame

34.Open one of the butterflys and resize 10%

35.Paste as new layer and add drop shadow

36.Move to the top left

37.Duplicate and mirror

38.Move to the bottom right

39.Add copyright and watermark

40.Add your name

41.You can merge visible



Hope you enjoyed my tutorial

My Baby

This tutorial was written by Ivory on 05/12/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Carmen Keys which you can purchase HERE

Font of your choice

Scrapkit I used is My Little Prince By Cays Creation and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 16%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add Drop shadow

6.Open the curly frame amd resize 17%

7.Paste as new layer

8.Click on magic wand

9.Click inside the frame and expand by 4

10.Open your tube and resize if necessary

11.Paste as new layer and move into position

12.Invert/delete/select none

13.Add drop shadow

14.Move tube layer below frame layer

15.Highlight frame layer and add drop shadow

16.Merge frame layer down with tube layer

17.Open one of the small bows and resize 10%

18.Hightlight mask layer

19.Paste bow as new layer and add drop shadow

20.Move to the bottom left

21.Duplicate and mirror

22.Highlight the top layer

23.Open the heart dangle and resize 10%

24.Paste as new layer and add drop shadow

25.Move to the right

26.Open one of the doodle hearts and resize 10%

27.Paste as new layer and add drop shadow

28.Move to the top right over the hearts chains

29.open one of the baby word art and resize 5%

30.Paste as new layer and add drop shadow

31.Move to the heart

32.Open one of the ribbons and resize 10%

33.Paste as new layer and add drop shadow

34.Move to the heart

35.Add copyright and watermark

36.Add your name

37.You can merge visible



Hope you enjoyed my tutorial

Peanut Butter Cup

This tutorial was written by Ivory on 05/9/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Peanut Butter Cup By Ivorys Designz and can be purchased HERE


1.Open a new image 500x500 white

2.Open one of the mats and resize 65%

3.Paste as a new layer and add drop shadow

4.Open one of the glitter circles and resize 85%

5.Paste as new layer and add drop shadow

6.Open one of the circles frames and resize 50%

7.Paste as new layer

8.Select your magic wand and click inside the frame

9.Expand by 3

10.Open your tube and resize if necessary

11.Paste as new layer

12.Invert/delete/select none

13.Add drop shadow to tube layer

14.Move tube layer down below frame layer

15.Hightlight frame layer and add drop shadow

16.Highlight top layer

17.Open one of the floppy bows and resize 55%

18.Paste as new layer and add drop shadow

19.Move to the bottom of the frame

20.Open one of the brads and resize 50%

21.Paste as new layer and add drop shadow

22.Move to the knot of the bow

23.Open one of the flowers and resize 20%

24.Paste as new layer and add drop shadow

25.Duplicate til you have enough to make an arch round the top of the mask (see my tag)

26.Add copyright and watermark

27.Add your name

28.You can merge visible



Hope you enjoyed my tutorial

Cherry Cordial

This tutorial was written by Ivory on 05/9/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Ismael Rac which you can purchase HERE

Font of your choice

Scrapkit I used is Cherry Cordial By Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add slight Drop shadow

6.Open one of the sequin scatters

7.Paste as new layer and add drop shadow

8.Open one of the gems and resize 20%

9.Paste as new layer and add drop shadow

10.Duplicate several times and place randomly around your tag

11.Open one of the flowers and resize 40%

12.Paste as new layer and add drop shadow

13.Place in top right corner

14.Duplicate and resize this one 50%

15.Move this one slightly to the right

16.Duplicate and move this one to the left of the big flower

17.Open one of the butterflys and resize 20%

18.Paste as new layer and add drop shadow

19.Move to the flower

20.Open one of the bows and resize 20%

21.Paste as new layer and add drop shadow

22.Duplicate til you have enough to place along right and left edges of the mask

23.Open one of the tied hearts and resize 50%

24.Paste as new layer and add drop shadow

25.Duplicate and mirror

26.Place them overlapping on the bottom right of your tag

27.Open your tube and resize if necessary

28.Paste as new layer and add drop shadow

29.Move to the left

30.Add copyright and watermark

31.Add your name

32.You can merge visible



Hope you enjoyed my tutorial

Lemon Chiffon

This tutorial was written by Ivory on 05/8/2009

Do not copy this tutorial and post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental.

You will need a tube of your choice.

I am using the art of Elias Chatzoudis which you can purchase HERE

Font of your choice

Scrapkit I used is Lemon Chiffon By Ivorys Designz and can be purchased HERE

I used this Mask(Just right click and save in your mask folder)

1.Open a new image 500x500 white

2.Open one of the papers in the kit and resize 70%

3.Paste as a new layer on your white

4.Load mask (I have fit to canvas checked) in supplies or one of your choice and merge group

5.Add slight Drop shadow

6.Open one of the glitter sprays

7.Paste as new layer and add drop shadow

8.Open one of the curly ribbons and resize 70%

9.Paste as new layer and add drop shadow

10.Move to the bottom

11.Open one of the flowers with a stalk and resize 60%

12.Paste as new layer and add drop shadow

13.Move to the left

14.Open one of the stars and resize 20%

15.Paste as new layer and add drop shadow

16.Duplicate several times and place randomly around your tag

17.Open one of the other flowers and resize 50%

18.Paste as new layer and add drop shadow

19.Move to the middle of the curl of the ribbon

20.Open one of the butterflys and resize 40%

21.Paste as new layer and add drop shadow

22.Move to the flower

23.Open one of the sequins and resize 30%

24.Paste as new layer and add drop shadow

25.Duplicate several times and place randomly around your tag

26.Open your tube and resize if necessary

27.Paste as new layer and add drop shadow

28.Move to the left

29.Add copyright and watermark

30.Add your name

31.You can merge visible



Hope you enjoyed my tutorial